sundownz

You can get bigger ones -- no need at this time.

26 each x 10 = 260

My Dad came in and installed the 240v panel for us (he was an electrician for 20+ years) -- each supply has it's own breaker. Brandon did all of the wiring on the board for the supplies themselves. Quite a bit of work in the whole deal but will make testing alot easier

Runs on 240v AC -- supplying 260 amps continuous current set to 14.8v Hooked up to some Stinger SPV-70s... need to get one more in there. Should do quite well... this replaces our prior setup of three Pyramid 40-amp units (only one recently as we blew up the other two). We went through those on a regular basis... this should be more reliable and much more power than we had before.

Yes!

E8 v.2 Production started today! ETA is roughly the end of November for these to arrive. As always with a pre-order there is the chance for delays so please keep that in mind -- pre-orders are final and there will be no refunds for delays. E8 v.2 Prototype Pictures: * Compared to SA-8 : E8 v.2 on the left * Bumped back plate allows 25mm of throw before bottoming out -- but the surround will stop the driver before that. * Exact same spider as the SA-8 but only a SINGLE layer instead of two like the SA-8 * Comparison to E8 v.1 Motor Specifications : D2 Model : RE: 3.927 ohms Fs: 43.59 Hz Qes: 0.643 Qms: 4.404 Qts: 0.555 Le: 2.75 mH Vas: 7.22 L BL: 13.023 NA Cms: 131 uM/N Mms: 101 grams Sens: 81.53 1w/1m Xmax: 10.5mm one-way linear Power: 200 RMS D4 Model: RE: 6.12 ohms Fs: 44.7 Hz Qes: 0.5456 Qms: 3.6545 Qts: 0.4748 Le: 4.02 mH Vas: 7.26 L BL: 17.45 NA Cms: 131 uM/N Mms: 96 grams Sens: 82.59 1w/1m Xmax: 10.5mm one-way linear Power: 200 RMS Some Testing : * Maximum excursion video. Car Audio Classifieds - View Single Post - E8 v.2 Prototype * Some SPL Testing We Did * Video of the SPL Test ----- Regular Price $90 each after pre-order PRICING ON PRE-ORDER: 1x E8 v.2 = $75 2x E8 v.2 = $70 each 4x or more E8 v.2 = $65 each Shipped in continental 48 states. All shipping is handled by FedEx or UPS ground -- shipping to HI or AK add $30 each woofer. Pre-sale in USA only. To order Paypal me at [email protected] Please include details notes about how many and what coil configuration you are ordering -- also specify it is for the E8 v.2 Pre-Order !!!

Had a typo... fixed. 600 RMS just like the 10s and 12s.

Okay guys -- all the details have been finalized on the SA-15s so we started production today. ETA is roughly the end of November for these to arrive. As always with a pre-order there is the chance for delays so please keep that in mind -- pre-orders are final and there will be no refunds for delays. SA-15 Prototype Photos : Specifications : FS : 30.9 Hz Qts : 0.60 Qes : 0.66 Qms : 6.12 VAS : 92.7 L Mms : 308.4 g Box Suggestions : Sealed @ 2.5 cubes (Qtc = 0.888) - F3 of 42 Hz Ported @ 3.0 cubes tuned to 35 Hz - F3 of 30 Hz Some Testing : * 150.1 dB sealed on the dash with ~4200 watts clamped power... did not damage the woofer. This box is not optimal for the SA-15 but still impressive * Free Air Excursion Testing I shipped the prototype to Russia... so I will post more testing once he gets it. ----- The SA-15s will come standard with the new spacer / cooling ring design AND the new magnet boot covers like the SA-12s now feature. * Rendering of new spacer / cooling ring -- the tooling is almost done for production... will post real pictures of the ring when it's done. * Magnet Boot Covers The motor and coil are the same as the SA-10s and 15s that everyone has been enjoying for a while now ----- PRICING ON PRE-ORDER: Regular Price will be $219 each after pre-order. Based on prior SA series pre-sales I don't expect these to last much longer if any time at all once they arrive. So if you have been waiting for them get in early. DUAL-2 and DUAL-4 Coils available ! If you order before September 15th the price will be as follows : 1x SA-15 = $180 2x SA-15 = $170 each 4x or more SA-15 = $160 each Shipped in continental 48 states cost. If you order after September 15th until the pre-order is over the price will be as follows : 1x SA-15 = $190 2x SA-15 = $180 each 4x or more SA-15 = $170 each Shipped in continental 48 states. All shipping is handled by FedEx or UPS ground -- shipping to HI or AK add $40 each woofer. Pre-sale in USA only. To order Paypal me at [email protected] Please include details notes about how many and what coil configuration you are ordering -- also specify it is for the SA-15 Pre-Order !!!

Very nice enclosure work !

Initial un-broken in specs on the SPL D2 coil indicate about 25% higher BL^2/RE -- the glue isn't dry so I can't measure it broken in yet... will do so tomorrow and confirm that it is that much higher.

Nice !

Nice build

Yep - 12.8 http://www.stevemeadedesigns.com/board/topic/50753-sundown-amp-clamp-tests/

I'll have pre-ordering for SA-15 and E8 v.2 opening up shortly for those waiting. Ironing out all the final details on production.

Bit more on the SPL coil for NS v.2... here is a comparison of spec : Dual-1 "standard" Coil : WW = 71 mm ID = 76.3 mm OD = 83.8 mm DCR = 0.95 per side Inner Gap = 1.15 mm Outer Gap = 1.35 mm Dual-1 "SPL" Coil : WW = 57 mm ID = 75.5 mm OD = 84.5 mm DCR = 0.8 per side Inner Gap = 0.75 mm Outer Gap = 1.0 mm So we have 0.75 mm more coil thickness in the gap and a lower DCR for SPL burp purposes. I'll do spec comparisons once they arrive... sample D1 versions shipped today so I should have them soon.

Done - should Mike text you too ?

The larger amps are selling pretty quickly, FYI.

Guess where one of two SAX-200.4 prototypes will be ?!

Almost forgot... E8 v.2 will be available around year end too : E8 v.2 Prototype - Car Audio Classifieds And yes... that means E8 v.1 can be re-built again as I will have parts.

A little as it is slightly more expensive to make -- not a huge amount by any means.

Few other things that haven't been directly talked about... just mentioned in passing : 1) Z v.2 woofers have been revised as time has progressed. * Coils are now 4-layer round quad-wound biflair copper coils... more robust than the original aluminum, the copper has a lower expansion ratio which helps in the tight gap, more BL^2/RE (motor force), lower FS, etc. * My testing shows no loss in SPL at lower power and a 0.3 gain above 6kw burps. * Top shorting ring was removed -- but internal ring was upgraded to copper. * WoofersEtc has ordered some of every size and coil configuration so I'll be posting new T/S specs for every size soon. 2) Nightshade v.2 SPL coils will be available soon... not suggested for daily as they tighten the gap but I expect higher motor force from these and the DCR is lower... also slightly shorter WW for lowered mass. Testing to come when they arrive.

Well guys... if all goes according to plan we should have some new stuff coming soon ! By years end we should have : * SAX-200.4 : SAX-200.4 Prototypes In - Car Audio Classifieds * SAX-50.4 v.2 (less crossover features and therefore cheaper) -- More information TBA. * SAZ-1500D v.2 (more compact... very similar power output... more robust MOSFETs for enhanced reliability -- of course the 1500D was already a tank) : SAZ-1500D v.2 Photos - Car Audio Classifieds * SA-15 Woofers : SA-10 and SA-15 Factory Pictures - Car Audio Classifieds Prototype SA-15 Excursion Test Video - Car Audio Classifieds SA-15s will be introduced with all the latest features we have been putting into the SA series right off the bat... new magnet boots, triple joint rings, new ventilation system upgrades, and so forth. I wanted these all to come on the 15s right away hence the delay in launching them -- but it is all nearly ready ! ---------- I am excited -- just though I'd put all this in one place... so keep your eyes out for some pre-order specials on the above items hopefully coming soon !

The following still available as of 3:04 PM EST on 8-12-10 ALL USED SUNDOWN AMPS HAVE 1-YEAR WARRANTY USED OTHER BRAND AMPS HAVE NO WARRANTY Some amps will have boxes and some will not. 7x SAZ-3000D NEW CASE * Excellent condition - $625 each shipped (x3) * B-Stock / Beat Up (not pretty but work fine) - $500 each shipped (x4) 3x SAZ-3500D NEW CASE * Excellent condition - $750 each shipped (x2) * Some scratches - $700 each shipped (x1) 2x SAZ-1500D OLD CASE * SOLD 8/9/10 * 2x SAZ-1500D NEW CASE * Excellent Condition - SOLD OUT 8/12/10 * B-Stock / Beat up - $275 each shipped (x2) 16x SAZ-2000D NEW CASE * Excellent Condition - $450 each shipped * Some scratches - $400 each shipped * Don't have exact count of each type... but most of them are excellent condition. 1x SAX-1200D Prototype * SOLD 8/9/10 * 1x SAZ-1000D NEW CASE * Great shape - no box - $200 shipped 1x AQ-1200D * SOLD 8/6/10* 1x RD 1750.1 v2 (Korean Made) * $300 shipped

That isn't how you calculate area http://www.mathgoodies.com/lessons/vol2/circle_area.html

Three tens would have the most displacement.