michigancapri92

im thinking i will do the bondo ... the pod right now is pretty strong but i think bondo will add more strength and then i might just sand smooth and paint pos. ill try the vinyl first

this was my first time ever fiberglassing ... i cleaned it up alot but dont hate :-)

should i cover the pod in bondo and sand before covering in vinyl or can i just cover the fiberglass ??? also would the bondo give more strength to the pod ?

ok thank you guys !! much help going to go try it now once im done sanding little bit more !!!!

would a hair dryer work ?? dont have a heat gun lol

i made some speaker pods for my doors and they are attached to a panel for the bottom of the door .... what is the easiest way to cover them in vinyl ??? doesnt like to stretch very easily and contour to the curves

why such HUGE wire ???

ok my car does not have power locks dont need remote start would like a nice alarm for a fair price with dome light sensor, shock sensor, and proximity sensor, dont need locking stuff or engine disable ... anything you guys have in mind ?

0 gauge wire = BAD 0 AWG gauge = GOOD never buy wire unless it specifically states AWG wire !!!!

best video ever !!!!

I ran some p1s in a sealed and a ported and I liked the ported ... deeper bass louder imo

thank you SOOO much wenn ... i just took the speakers out so that i can redo the spacers and i will put back in and play that song and see what happens from there if i notice a difference then i will be waiting to get sound deadener .... fatmat seems liek the cheapest but good so i will be using that stuff

as of right now its 1 6.5 per door will be making another pod where map pocket was for another one that panel is removable so makes it simple and im using the orion cobalt line. polarity is good they are diff size crimps for diff polarity, the HPF is set to 80hz on HU and crossover on amp is set to ALL

spacer was made form 3/4 mdf and it seemed like a poor fit so i will be remaking that and getting a better sealer for speaker so i can isolate all air into door panel .... hopefully the other half will get my hints and get me a 25sqft of fat-mat for xmas :-) i will be able to deaden the doors and that should make a difference

fiberglass enclousure for inside the stock location ?

ok i have a 6.5 woofer component set in the stock door place and the bass is gone 0 bass no sound .... speaker moves alot so its making the bass but the sound is not there ... its mounted with a spacer i made to go from 5/14 t0 6.5 and i will be remaking that again but could just a bad spacer make all the difference ??? what are some things i can do to get more bass from the stock door locations ?

i know but would i just tap the wire into other one pos to pos neg to neg ?

that would be sweet send me a pm

how much would 2 custom 8inch 100watts be ?

thanks i think i might actually do 3 6.5 and 2 tweets per door i htink i will be able to get some good mid bass with a 6.5 inch prolly gona do 3x 6.5 comps how much would the 100WRMS 8inch be ?

would would be a good midbass subwoofer ??? i would like to run 8inch 2x 6.5 and 2x tweeters what would be a good 8 inch speaker ?

exactly what im asking in description ? door panel will have 2x 6.5 orion components and Rockford p1 8" would this make good door panel ?

I have 2 sets of component speakers and the crossover is built into the wire and how would I run then in parallel to an amp both components are 4ohm wand to run 2 components at 2ohm to the amp how would I wire them ??

I learned to never use a codless battery drill battery a 9v bayyery is better to test less chance of damage to sub

idk i almost used a 5 channel amp ( got car broken into the day i bought it ... all mounted never wired up) never used em but i would say depends on what you want to run on the mono ... usually 5 channels dont have a very high 5th channel wattage for beefy subs just giving my .02 of what i have seen i am not at all an expert tho