-
Posts
282 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Everything posted by bmxscion
-
Sundown : New 2012 Stuff
bmxscion replied to sundownz's topic in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
No, they are the complete opposite... they are big massive frames. The shallowest sub I intend to make is the SD-2 line -- based on the 4-spoke which is one of the shallowest "conventional" frames available. I haven't seen much talk about the SD line since they came out. Am I the only one that has done (not finished) an install with the SD line? ">http:// ">http:// -
That's a clamp I picked up at Harbor Freight for like $6 or $7. It is a little PITA at first but it did work very well. I did not use any screws or nails when assemblying the box. I did use one long screw to help hold down the amp rack mounts just because of the angle I couldn't clamp very easily. But of course, I did pre-drill first. I forgot to get a shot of the whole thing in the car with the end caps on before I left....
-
Here is a quick vid i made sitting here in the desert while deployed. I didn't get a chance to finish it before I left. This is my first attempt at a youtube vidoe, so bear with me. Any questions about the rest of the system just ask. I may be kinda late on responses since the internet is kinda spotty here, and doesn't always work.I couldn't get the video to show up on the screen, so I am just going to add a link.
-
My box for a single SD-2 12"
bmxscion replied to bmxscion's topic in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
It's not that I made the wires too short. Just redoing the entire back end of the system layout and putting the seats back in. Here is the previous set up: Here is (was) the back side of the box: -
My box for a single SD-2 12"
bmxscion replied to bmxscion's topic in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
It's coming along. I forgot about the part where I have to extend the wires to compensate for the movement of the amps more rearward. I guess the easiest fix is to just make new grounds for the rear two amps and keep the other 551X that is under the seat along with the MS-8 grounded to the ground dist block that is on the rack under the seat. My power leads are long enough to make it to the back, but not the grounds. I am about 4" short. I will put up some pics of how it was setup before this box so you can see how much different this is. I had no back seats before with a wood floor that was like a cargo area. This is in a 2005 Scion xB. -
My box for a single SD-2 12"
bmxscion replied to bmxscion's topic in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
I've got more of SQ set up. All HAT frontstage, 3 way active with a JBL MS-8 processing. I really liked the way my RF HE2 sub was in a sealed box so I figured I would try another sealed box. I can always make a ported box later, but I think it will sound good with a sealed. -
Here is the underside of the baffle so I can use 1.5" long 1/4 x 20 allen bolts to mount the sub. "> Here is the under side of the hurricane nuts. i put a dab of construction adhesive on them to help with them slipping in the holes over time. "> Here is pretty close to what it will look like when finished. The baffle and amps are just sitting there for the pic. There will also be another panel on top to flush mount the sub and cover the amps. The outer wall that will hold the cover over the amps has not been put on in this pic. "> Here is the inside lip and outer wall drying from the glue. "> "> Here is the amp mounts before gluing them down. Here is the baffle clamped and glue drying. I used Tite Bond III to glue everything together. NO screws or nails excpet for one screw to hold each amp mount down but that will most likely be removed tonight after the glue sets up nice. Should I use any poly fil inside the box, or just leave it bare wood? Inside dimensions are 17.5" x 17.5" x 6". It should be just about 1cu ft maybe a little less minus driver displacement and that ring on the bottom side of the baffle. Other than that any suggestions or critiques....?
-
Sundown SD-2 In Stock !
bmxscion replied to sundownz's topic in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
I got my SD-2 from fed-ex today! It looks awesome and smells like fresh paint and glue. I have a sealed box that is about 1.6 cu ft. Would that be too large to "test" this sub out in usng a RF 501bd amp to run it? Looks like I will be going to get a sheet of MDF to do my new install today. Thanks for the fast shipping and excellent customer service Jacob! -
Sundown SD-2 In Stock !
bmxscion replied to sundownz's topic in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
Could the pre-orders see shipping soon and possibly delivered by next weekend? -
gates belts?
bmxscion replied to Kush Killer's topic in General Audio - Can't find a category for your question? Ask here.
I just got back from O'Reilly's and I had to have a set of Gates belts delivered from another store waaaay on the other side of town, so I can't get them until tomorrow. I figured I would get the power steering belt as well for my 2005 Scion xB so that both belts are fresh after putting on my new Mechman 220A alternator. -
SD-2 10/12 Production Photos
bmxscion replied to sundownz's topic in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
I e-mailed you Jacob about getting one of these. I am not planning a big build, but it is definitely an awesome SQL build. I am using two RF 551x four channels, and a RF 501bd, JBL MS-8, and all powered by an XS D3400 and a 220 A Mechman alt. in my 2005 Scion xB. All active 3 way setup using HAT products for the sound stage. The sub I am replacing with the SD-2 w is a same year matching RF HE2 (chrome dust cap) 12" D4 sub. My amp's gain is all the way down as well as the gain on the MS-8 and it is pretty amazing. I want to see what the SD-2 can do with a little more power on the sub end of this setup and see how the MS-8 makes it sound. I think I want to do the box sealed and able to hit all the lows audible to our ears. Great job on this line of subs and I can't wait to get one of your products installed in my car! -
XS Power Batteries Pics
bmxscion replied to Nathan @ XSpower's topic in XS Power Batteries / Chargers! (and other stuff too)
Just installed a D3400 in stock location in my 2005 Scion xB. Only modification I had to make was since the D3400 is a little shorter in height that the stock battery I had to add like 10 washers on the j-hook that is under the Knu fuse block which is not visible in the pics so the there was enough threads to secure it down tightly. other than that, pretty much straight drop in. -
New site to buy the SMD DD-1 and more!
bmxscion replied to meade916's topic in SMD Distortion Detector (DD-1) Topics
I just ordered one for my birthday present to myself which is later in the week after they are released. Maybe I will have it by that weekend so I can try it out. -
XS Power Dealers
bmxscion replied to bre2ts's topic in XS Power Batteries / Chargers! (and other stuff too)
dwright27- I tried to send you a PM about a price quote on a D3400 but it said you are not accepting any PM's....If you could PM me we can talk about it there? Thanks.