how big of an aero port for:
2 10s
2 12s
1 15
etc
so what kinda port area pretty much should i be looking at?
and what kinda in sq per cube?
where to buy? cheapest? good places to buy with good product.
PVC ok? is flaring required( i saw vids on how to flare PVC) is it necessary.
any other general rules for a guy with no experience with aeroports.
i have built plenty of slot port boxes, im looking to save space and be louder with aero ports!!
thanks guys
why do you want them to hit that low? even though DD subs get down. that is still very low and risk damage unless you tune your boxes low. but with DDs port needs that is very hard to tune low. and the DC 2k may be pushing it for those 2 1500 12s. box rise may be your friend. dont wire to .5. if you wire to 1 ohm you should be fine
i recently made a box for my friend for his 515c and it sounds very loud for their entry level sub.
500 rms is a good amount for this series i dont see a problem running 600rms or under to them. just make sure you dont clip them. and dont over excurt, DD subs seem to easily bend former with my experience. the box was 3.87 net tuned to 37 with about 15.5 in per foot.
the 1500 series is the best bang for your buck in my opinion.
All DD subs love box. so give it some air to breath. 2.5 cubes net should do the trick. 2.25 will work too with aroun 15-16 in sq per cube. 35-40 inches of port. 1000 clean rms is most id send to a 1500 series sub.
i don't know any of these people only a couple by name but...
look what i found and i think orionstang hinted on this haha
So I sent this email to Dale to ask him about it and he sent this back to me:
“Dale,
It is with regret that I must inform you that I have decided to end our relationship.
i think he missed that one
after 665 posts you should know the no vs thread rules. and why would you listen to some no name guy that gives you his opinion over a couple other guys with experience with alpine or audio in general. sorry to be harsh on you but your comment about which stated "lol ok bro..." didn't come off like candy and sweetness, more of an ass hole imo.
we can see what was said so no need to restate.
i love how the noob tells the other noob what to do and he listens. neither of them know the rules and they think type rs cant get loud. ahah type rs can get the job done if desinged right into the system.
clearly they know everything about audio here especially advice givers such as cosmo
oh yea
in before lock
so what is the verdict. does using a flooded (stock) battery and an XS AGM or other bat togehter hurt the AGM bat or the flooded stock bat? and is it ok to combine and use both at once?