One Way

in that case you will want the d2 coils for ur sub. they say the skars are underrated, so if you do put the whole 800 watts to the 600 watt sub be carefull its not a dirty signal, or else its bye bye sub.

Actually yes there is. i understand there is differences between them all, but i think for his sake it doesnt matter as much. besides being able to keep up the electrical by running smaller ohm loads, and the thermal rise as the ohm load drops.

I just noticed my previous statement was off, so il make it simpler. Say you have a 1000 watt d2 sub and you are looking to power it. You would either look for an amp that can do 1000 watts at 1 ohm, or and amp that can do 1000 watts at 4 ohms (generally those are more expensive) Hope that makes sense.

There is no difference between series and parrallel, or d4 and d2. It's only there to let you adjust the type of amp you can run to the subs.

No dude, if you're only running a single d2 woofer you can only bring it down to 1 ohm in parrallel, or higher it to 4 ohms in series. You can't leave it at 2 ohms.

Yeah I know about the mirror, it moves a lot right now with my blown 12. I can hear it vibrate and hit against the windshield, matter of time till it starts cracking. Can't seem to find a way to get it off, but il do it eventually.

Ok, thank you ray I appreciate the help. Even after I looked dumb attempting to design the 4th order. I will do a ported box to your recommendations.

Was hoping it wouldn't come to building a ported. Main reason why I bought the 10s to try out a 4th, but oh well I guess. So what would be an ideal ported box for a low musical box? **Side note ray I asked a question on your help thread.

Dang that big? I was hoping to get away with a smaller box because the eclipses don't have that much room. Is there a certain point you start with, when designing a 4th order??

I understand that but I'm just using winisd as a guide, I kno it will act different in the car.

No one?

I recently bought some type Rs from a member on here. I always wanted to try a 4th order and this seemed like the perfect time. Im having a little trouble with the frequency bandwidth for the bandpass. I need more help on designing one and need to know what i should shoot for when i plot the curves on the graph. I would like to have a flat response, but typically the db gain is lower, so as flat as possible. would like to play lows pretty good and still be loud. i know Winisd does not take cabin gain into account. car its goin into is a 01 eclipse two 10" type Rs YELLOW curve is 1:1 ratio 44 hertz. 1.25/1.25 cubes AQUA curve is ~ 2:1 ratio 42 hertz. 2/1.25 cubes PINK curve is ~ 2:1 ratio 44 hertz. .78/1.73 cubes (this is the flatest response i could get it but yields small output) any help please enlighten me as i dont know anything...

apparently someone stole my 1st comment glory on youtube... lol

I have a special place in my heart for legos =]

i used to use the idump program, but that was a while back.

What about iPods?? Everytime there's a vid on a thread it makes the vid really wide for some reason. It makes the thread small like this picture.

It's fucking alright here. Lol this a funny website, I can picture someone screaming at me telling me what the fuck the weather is haha.

Pmd

Yeah i love my kenwood... But if u wana use the 4v to ur advantage u have to put the level on HU up, not all the way tho because u will get distortion. Find out the highest u can go with ur dd1

Damn that sux =[ For sure my professor for history of rock and roll is gona do a whole lecture about him tmorow.

please elaborate. i thought bandpasses were mainly for peaky spl applications? No u can make them whatever ur preferences are. It's possible to make a 4th order with a pretty flat response, it just depends on how experienced u are with bandpasses. All about ratios.

Dude best thing to do so the spoiler won't vibrate as much is to do a bandpass thru the armrest!

Looks like it's 4th order time!

i cant really do that, my seats dont fold down. i just bought the car so i dont wanna remove the seats completely. i wanna keep it clean and fully functional. If u wana get crazy, how about porting it thru ur rear deck.

Fire ur subs forward into the cabin and seal it up. You won't need to worry about the spoiler.