crunkjuice1 Posted February 15, 2011 Report Share Posted February 15, 2011 Great build demo when your done!!!! I'm over in Culebra/Callaghan area Link to comment Share on other sites More sharing options...
JDM KEViN Posted February 15, 2011 Report Share Posted February 15, 2011 Nice build man. Link to comment Share on other sites More sharing options...
onebadmonte Posted February 22, 2011 Author Report Share Posted February 22, 2011 Small signs of progress. I updated the battery rack CAD a bit. I think this is going to work better than what I had before. Here is a shot from the top. I added the battery hold downs, and detailed the whole assembly with some hardware. From the bottom looking up. Here is a shot of the hanger from the bottom up. You can see some of the hardware I'll be using. One last one of the hanger from the top down. Now some progress in the real world. This one is me testing the strength of the angle irons that I'll be using. My cutting rig. The rack coming together. This is how I handled the corners. I tacked them together, I'll have a friend with a bigger welder finish them off. Plus he's a better welder than me. o_o Warhorse vs A Pair of SMDeez build Olds Cutlass Cierra IB build 2 Fi IB3 18s Link to comment Share on other sites More sharing options...
Dj_Scarface Posted February 22, 2011 Report Share Posted February 22, 2011 Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
meade916 Posted February 22, 2011 Report Share Posted February 22, 2011 great progress - i really like how clean your work is. Respect! All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
meade916 Posted February 22, 2011 Report Share Posted February 22, 2011 why didn't you just ran the wire through first one, and only use bolt on outside like now? why didn't you just ran the wire through first one, and only use bolt on outside like now?I just figured I would make it easier to switch out woofers this way. I won't have to deal with cutting and splicing wires together. i was thinking the same thing - you could just take the wires off the sub.....but you have DD's so you dont have terminals on the subs, just 8ga wire....makes more sense if people know that. All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
mazdaspl Posted February 22, 2011 Report Share Posted February 22, 2011 You have some great Cad skills man.. your work and build are coming along great.. I will be watching out on this one.. Jay Link to comment Share on other sites More sharing options...
FieroGrande Posted February 22, 2011 Report Share Posted February 22, 2011 Agreed to what jay said Link to comment Share on other sites More sharing options...
onebadmonte Posted February 22, 2011 Author Report Share Posted February 22, 2011 great progress - i really like how clean your work is. Respect! Thanks man. I appreciate that. i was thinking the same thing - you could just take the wires off the sub.....but you have DD's so you dont have terminals on the subs, just 8ga wire....makes more sense if people know that. Lol, that didn't even cross my mind. You have some great Cad skills man.. your work and build are coming along great.. I will be watching out on this one.. Jay Thanks, I just hope this rack comes out as good in person as it did in CAD. Agreed to what jay said Thanks. Warhorse vs A Pair of SMDeez build Olds Cutlass Cierra IB build 2 Fi IB3 18s Link to comment Share on other sites More sharing options...
Benji0687 Posted February 22, 2011 Report Share Posted February 22, 2011 Coming along nicely bro! How good are those alts? I've never heard of them...is the price and quality good? I like the way you dealt with the direct leads on the DDs and wiring the box...very creative. You might consider heatshrinking/looming the pairs together, just an idea. Cant wait to see your batt rack done...looks very well designed. Keep us updated with more pics! 1989 Chevy Caprice Classic350ci V8 High Performance JVC Arsenal HU JL XR series components Infinity Reference 6x9s Pioneer Premier 4-Channel Clarion 2-Channel Rockford Fosgate Series 1 2-Channel Fusion 2000.1D MTX Crossover RF, Knu, Kicker, and Monster wiring NVX VCW 12in. Sub **Won on here from the Sonic contest!** *Build log coming soon!* Starting all over pretty much which the gear listed...lost almost everything I had, including my life. Never take life and what's in it for granted. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.