slamin87 Posted February 23, 2011 Report Share Posted February 23, 2011 ok guys if you all know. i just got done painting the deville rims and all that. im done with that part of my car now im starting with the system. i want to run the selium 6inch speakers 4 of them 2 in the front and two in the back the thing is what would i need to order with them tweeks, horns, bass blockers can some one let me know what they got with theres that way i can just get the same it will be ordered from partsexpress.com input please Quote Link to comment Share on other sites More sharing options...
Sir-Lancelot Posted February 23, 2011 Report Share Posted February 23, 2011 You really need a crossover that will bandpass. Either a HU, external, or even an amp with XO controls like the sundown. I prefer the HU, easier to dial it in while in the driver seat! Quote 2001 Yukon XL Sitting on 35 x 12.50 x 20, XD Monsters Headunit: Clarion DXZ785USB Front: B&C 10NW64 10" Neodymium Woofer, Crescendo XST2 Rear: B&C 8NDL51 8" Neodymium Woofer, Crescendo XST2 Mids & Highs Amps: MB Quart DSC 4125, MB Quart DSC 480 Subs: 4 18" SSA ZCONS Sub Amps: 4 GP3K Pro Electrical: Iraggi 260a, 3 tejcurrent 240a, tejcurrent quad bracket Kinetik - 6 HC2400 My Build Log Link to comment Share on other sites More sharing options...
CaptainzPlanetz Posted February 23, 2011 Report Share Posted February 23, 2011 What amp are you gonna use??? Depending on the Crossovers on the amp you may not need any bass blockers you can just High pass em at like 55-65hz. I cant tell you exactly without knowing the models's of the Seleniums. Also you are gonna want tweeters on a seperated amp, since they will need to be crossed over at a completely different frequency that the mids. Quote ¿ǝɯɐƃ ǝɥʇ Trolls never learn............ All BS aside, If I see one more comment in here that is NOT about the pre-sale, I will start the vacations. And that includes the trolls feeding the trolls. YOU THE ONE THAT SOUND LIKE A OGER AND HUMPBACK/TROLLS? Add "SMDLIFER" on Xbox LIVE to play with other SMD members. Link to comment Share on other sites More sharing options...
slamin87 Posted February 23, 2011 Author Report Share Posted February 23, 2011 What amp are you gonna use??? Depending on the Crossovers on the amp you may not need any bass blockers you can just High pass em at like 55-65hz. I cant tell you exactly without knowing the models's of the Seleniums. Also you are gonna want tweeters on a seperated amp, since they will need to be crossed over at a completely different frequency that the mids. this is the amp http://www.sonicelectronix.com/item_9893_Rockford-Fosgate-Punch-P400-4.htmland here the drivers http://www.parts-express.com/pe/showdetl.cfm?Partnumber=264-422 Quote Link to comment Share on other sites More sharing options...
slamin87 Posted February 23, 2011 Author Report Share Posted February 23, 2011 can anyone give me the things they bought with there setup that way i can just get the same cause going active is a pain in the ass if you dont now anything really about like me lol. Quote Link to comment Share on other sites More sharing options...
Rell Posted February 23, 2011 Report Share Posted February 23, 2011 Don't put bass blockers on them seleniums, I have two of those 6's. I never put them in a sealed enclosure but I heard they got a nice little amount of bass to them if you seal them up. Quote Link to comment Share on other sites More sharing options...
slamin87 Posted February 26, 2011 Author Report Share Posted February 26, 2011 daily buMP come on guys i really need help on this trying get it ready for that show on the 26 at AI Quote Link to comment Share on other sites More sharing options...
slamin87 Posted March 1, 2011 Author Report Share Posted March 1, 2011 bumb i really need help guys i want to order these already can some one give me a good cross over for them or should i just put the amp on low instead of full range Quote Link to comment Share on other sites More sharing options...
kingsuv Posted March 1, 2011 Report Share Posted March 1, 2011 Those mids don't like much under 80hz with power, I would suggest killing them around 120. You will want to cut down from 800 to 4k and kill them after 4k let the tw pick up after that. These can sound very good with the right amount of processing. They are VERY efficient so you don't need a ton of power to get them loud. Mine only get about 25-35w at most and will drown out anyone trying to talk in the truck. Imaging wise, I found they do better off axis then on. They do image well and have have a nice height to them. They can also be difficult to narrow in a center with different voice ranges. Quote Designing, building, and shipping boxes. Yahoo IM - kingsuv00If the listening level is too loud, please inform the driver, so he can promptly pull over, and let you out. not many cars can get me to pluggin my ears but this one.......damn. I mean the first minute is ok but that thing just really starts digging deeper and deeper in your earhole till you cant stand it no more. Seems like it does it with relative ease....16 12's on 8 amps.........gotta love it. Link to comment Share on other sites More sharing options...
Team Bassick - Kimo Posted March 1, 2011 Report Share Posted March 1, 2011 (edited) n/m I see Bill has chimed in. Your in good hands. Edited March 1, 2011 by Team Bassick - Kimo Quote KIMO @teambassick http://www.teambassick.com Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.