monsterenergy93 Posted February 28, 2011 Report Posted February 28, 2011 Hey guys i dont know if im posting this in the right section or not but i need some help. I have designed plenty of boxes before and entered in local competitions. I need a new project and was wondering whats the best way to wall off my extended cab truck. Such as how can i seal up the box so its air tight given that its not really a regular cube. fiberglass corners? and also whats the best way to anchor it off inside a truck
dwright27 Posted February 28, 2011 Report Posted February 28, 2011 You build it with wood ... Screws, and glue 2006 F-150 4 DC XL M2 18's Walled Daily Driver XS Power 4 DC 3.5kw Team DC Team S.P.L. Lot of Audio Technix and 1/0 DC Audio Dealer American Bass Dealer XS Power Dealer Audio Technix Dealer
Spitfire2k6 Posted February 28, 2011 Report Posted February 28, 2011 You build it with wood ... Screws, and glue nooo...... wtf?!?!? lol Live life to the full... Then TURN THAT BITCH UP!
smokeumtires Posted February 28, 2011 Report Posted February 28, 2011 You build it with wood ... Screws, and glue I was gonna say the exact same thing LOL OP click on my build log below, also READ everything you can on buildin one.. Meade give a TON of helpful guidelines
Guest Posted February 28, 2011 Report Posted February 28, 2011 You build it with wood ... Screws, and glue dont be a smart ass, this can turn out to be a good thread. how many people do you know that can actually just JUMP into making a +300lb enclosure and make it safe and secure with no prior knowledge of doing it.
uhoh_45 Posted February 28, 2011 Report Posted February 28, 2011 (edited) You build it with wood ... Screws, and glue dont be a smart ass, this can turn out to be a good thread. how many people do you know that can actually just JUMP into making a +300lb enclosure and make it safe and secure with no prior knowledge of doing it. my second box i ever built was a wall in my cavi so its dueable made base frame n screwed it to car built floor for wall screwed that back unflush piece into the rear of vehicle then used some styrofoam insolation and sealed er off with ductaape ugly i know but it worked 18" sub in cavi Edited February 28, 2011 by uhoh_45 R.I.P! (Nov-29-2009) 92 explorer - 4 Atomic Apxx 15s duel .7s - 4rth order bandpass wall -4 powerbass XA-3000D's - 16 8volt batts wired to 16 volts - (9+/9-) runs 0gauge - 152.3 Db @ 29hz BUILD LOG current build 97 chevy lumina4 - 1 Atomic Apx 18 - 6 cube slot port trunk sealed off - 1 powerbass XA-3000D - 2 optima G31s in spare tire18 1 run 1/0 lumina build log
Red-navi-916 Posted February 28, 2011 Report Posted February 28, 2011 (edited) if u have to ask i suggest u dont build it your self, because before u know it there will be a guy talking shit and your going talk about having a bigger motor and having his hoes Edited February 28, 2011 by Red-navi-916 BUILDLOG http://www.stevemeadedesigns.com/board/ind...showtopic=61862 "98crewcab"Never a POS....just always "a work in progress" lol that's how we roll bitches!!! Your a lowlife kid. I bet your mother wants to kill herself for not swallowing your ass.
Guest Posted February 28, 2011 Report Posted February 28, 2011 You build it with wood ... Screws, and glue dont be a smart ass, this can turn out to be a good thread. how many people do you know that can actually just JUMP into making a +300lb enclosure and make it safe and secure with no prior knowledge of doing it. my second box i ever built was a wall in my cavi so..... some people arent as fabricated-inclined (word?) as others.
TeamHT Posted February 28, 2011 Report Posted February 28, 2011 You guys are acting as if building a wall is so completely different from building "regular" enclosures. of course you're going to have extra steps to stabilize and seal off but the box is a box. And OP,what do you mean not a regular cube? Lol Tell me...does this smell like chloroform to you?
TeamHT Posted February 28, 2011 Report Posted February 28, 2011 You build it with wood ... Screws, and glue dont be a smart ass, this can turn out to be a good thread. how many people do you know that can actually just JUMP into making a +300lb enclosure and make it safe and secure with no prior knowledge of doing it. A lot of people I know and have met can and have. If the OP has built boxes like he says he has, this will be a walk on the park. And like said by Smokeum, there are many build logs with good pictures along the way. Tell me...does this smell like chloroform to you?
Recommended Posts