fecupe2001 Posted March 5, 2011 Report Posted March 5, 2011 Hey guys, there are tons of things that i know and a lot more that i don´t , i´ve always seen people routing the edges of the box and i know for sure that you can gain some tenths on the termlab by doing this, also, it looks tight IMO hehe , anyways , my question is, how you guys do it without damaging the "razor" (english sucks hehe) of the router with the screws???? i mean, i have to screw the box together before routing the edges so that´s why i´asking!! Maybe the only way it´s by not using screws but you use "staples" (that´s the name) instead?? thanks for the inputs Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/
Alex K Posted March 5, 2011 Report Posted March 5, 2011 drive the screws deeper. or when you see a screw go over it really slow. Quote 2006 Nissan Z Track. My Feedback Thread i used to think a band pass was something you were around your neck or something.
slim2fattycake Posted March 5, 2011 Report Posted March 5, 2011 unscrew the screws. Quote SPL-Lab REPCar: 1996 Honda Accord F22B1 CoupeSuspension: Megan Racing Full Street Coilover Dampener KitAlternator: DC Power XP 270Batteries: XS Power D5100 & D3100Wiring: KnuKonceptz & 2/0 Welding cableHeadunit: Kenwood KDC-MP642UComponents: Hybrid Audio ClarusAmplifers: Lanzar OPTI250X4Subwoofer: 2 Sundown Audio E8.v2Deadener: Sound Deadener ShowdownSPL Meter: SPL-Lab RTA Pro meterWant an SPL meter for a lot less than the cost of a Termlab, but just as accurate and has the same features? PM me.CA ref: (enellz, 92c1v1c, el_chupo_, Thixx, Kraudio12, SethPhillips, NJack2AF, JamesKarr, ExpoSport, 01 S 10, wgsj_fortvalley, fast306stang, Lakota, blackga, TheLow, adrian1185, the727kid, rudy, sundownz, lmllopez, traksta15, gentlejax, satchel50207, Bigthangs, Goindef154)CACO ref: (extremechevyman67, ghostmechanic, FatBoy2, TheMan007, bdufner, 350zkid, ironb, bmansbach)SSA ref as phi: ( shizzzon, porkchop, onebadmonte, stevemead, TRP, ///M5, denim)SMD ref: (DC Power Rob, Nathan@XSPOWER, Jman08)And then some.
fecupe2001 Posted March 5, 2011 Author Report Posted March 5, 2011 unscrew the screws. thaT was my first idea, but wouldn´t look like shit when i screw them again?? or maybe it would crack a little bit the MDF since it would shrink the size of it?? Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/
slim2fattycake Posted March 5, 2011 Report Posted March 5, 2011 after your glue has dried, you don't need the screws anymore. Quote SPL-Lab REPCar: 1996 Honda Accord F22B1 CoupeSuspension: Megan Racing Full Street Coilover Dampener KitAlternator: DC Power XP 270Batteries: XS Power D5100 & D3100Wiring: KnuKonceptz & 2/0 Welding cableHeadunit: Kenwood KDC-MP642UComponents: Hybrid Audio ClarusAmplifers: Lanzar OPTI250X4Subwoofer: 2 Sundown Audio E8.v2Deadener: Sound Deadener ShowdownSPL Meter: SPL-Lab RTA Pro meterWant an SPL meter for a lot less than the cost of a Termlab, but just as accurate and has the same features? PM me.CA ref: (enellz, 92c1v1c, el_chupo_, Thixx, Kraudio12, SethPhillips, NJack2AF, JamesKarr, ExpoSport, 01 S 10, wgsj_fortvalley, fast306stang, Lakota, blackga, TheLow, adrian1185, the727kid, rudy, sundownz, lmllopez, traksta15, gentlejax, satchel50207, Bigthangs, Goindef154)CACO ref: (extremechevyman67, ghostmechanic, FatBoy2, TheMan007, bdufner, 350zkid, ironb, bmansbach)SSA ref as phi: ( shizzzon, porkchop, onebadmonte, stevemead, TRP, ///M5, denim)SMD ref: (DC Power Rob, Nathan@XSPOWER, Jman08)And then some.
fecupe2001 Posted March 5, 2011 Author Report Posted March 5, 2011 drive the screws deeper. or when you see a screw go over it really slow. Deeper? that´s a good option? i mean, wouldn´t the router still reach the screw?? Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/
Bakerman Posted March 5, 2011 Report Posted March 5, 2011 ^^^True...this is how I do it. I get a "countersink" bit, which actually makes a hole a couple of cm deep that are just bigger than the screw head, leaving the screw below the surface of the wood. I pull them out one line of screws at a time, route my edges, then put them back in, put a little bondo over them. The bondo works if you are not covering in carpet, but painting or covering in rhino lining. Just gives it a smooth look. Quote
RAM_Designs Posted March 5, 2011 Report Posted March 5, 2011 Just take them out and then put them back in if you want. Quote Ryan Miskin - owner of RAM Designs I have my PM's turned off, please email at <script data-cfhash='f9e31' type="text/javascript"> /* */</script> 2200+ designs since March 2011...
Alex K Posted March 5, 2011 Report Posted March 5, 2011 drive the screws deeper. or when you see a screw go over it really slow. Deeper? that´s a good option? i mean, wouldn´t the router still reach the screw?? No. The router bit doesn't eat away that much wood lol. And you can adjust how much you want to take off. I go over screws/nail gun nails all the time. Just go slow. You go quick it'll catch and not be good. Blade is still sharp too. Quote 2006 Nissan Z Track. My Feedback Thread i used to think a band pass was something you were around your neck or something.
uhoh_45 Posted March 5, 2011 Report Posted March 5, 2011 Just take them out and then put them back in if you want. its what i do Quote R.I.P! (Nov-29-2009) 92 explorer - 4 Atomic Apxx 15s duel .7s - 4rth order bandpass wall -4 powerbass XA-3000D's - 16 8volt batts wired to 16 volts - (9+/9-) runs 0gauge - 152.3 Db @ 29hz BUILD LOG current build 97 chevy lumina4 - 1 Atomic Apx 18 - 6 cube slot port trunk sealed off - 1 powerbass XA-3000D - 2 optima G31s in spare tire18 1 run 1/0 lumina build log
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.