SQMonte Posted March 24, 2011 Author Report Share Posted March 24, 2011 I hear it usually cost about $75 per fender, but if your handy with body work I don't think it's too hard to do on your own. Def not handy with bodywork so I might have to pass on that Rent a fender roller, and use a heat gun. Or have a shop do it any idea who rents them? How i did mine was with a baseball bat, The biggest one u can find but make sure It's an aluminum one. Then have someone get on the car to push some weight on the car and have another person hold the bat on the tire and then have someone else drive the car slowly back and forth It's pretty easy and if you already own the bat It's a free job and it comes out with good results. If this was a project car, I might give that a shot I cut the lip out of the inside fender of my wifes deville and no more issues I could get away with that.....if I had something to cut it with Easy to do with a bat. But if you want a shop to do it check these guys out... http://sacramento.cr...2279939907.html Bingo! Gonna go see them asap! Thanks man Quote Alpine CDA-117...Memphis 16-X03 CDT Audio SQA-4100...SEAS Prestige H1396...Crescendo MP-6 Soundstream Rubicon 1.2500d...Digital Designs 3512f Link to comment Share on other sites More sharing options...
99vic Posted March 24, 2011 Report Share Posted March 24, 2011 (edited) finish em off powder coating hands down the best in sac.. 916-807-5228 Ask for Eric 916-807-5229 Ask for Sonny.. they roll the finders for my boy that does all those donks i was tellin you about. finish em off info or if you wanna do it ghettofab i got a grinder to cut the lip of the fender. Edited March 24, 2011 by 99vic Quote REST IN PARADISE BIG RICH (Sqmonte) never forgotten Why do you guys ALWAYS dispute on NUMBERS????? It's such a played out argument, so fucking annoying.... It's 12 fuckin 15's.... It's louder than you... Shut the fuck up... /Rant I'm so jealous, it makes me want to club baby seals. That shit gets down HARD!dont buy from knowledge he will scam you. http://www.stevemeadedesigns.com/board/topic/30995-official-knowledge-feedback/ Link to comment Share on other sites More sharing options...
herbykw Posted March 24, 2011 Report Share Posted March 24, 2011 My buddy had that problem in his GTO. He bought a dremmel for about $20 and used it to cut the lip out of the inside. Fixed it for him. Just make sure your rubbing on the lip before you waste time and money cutting it. I had 20"s on my Monte and they rubbed up when i had anyone in the back seat. It road like crap so i went back to 18"s. good luck Quote 06 300C 5.7 Hemi K&N CAI JVC KW-AVX640 6.1" DVD DC Audio 3.5k 6 DC Audio 8"s 6 cubes 8" aero port at 32hrtz http://www.stevemeadedesigns.com/board/topic/183798-chrysler-300c-8-build/?p=2731834#entry2731834 Link to comment Share on other sites More sharing options...
killallblue Posted March 24, 2011 Report Share Posted March 24, 2011 make a tool like this lol Quote Link to comment Share on other sites More sharing options...
SQMonte Posted March 24, 2011 Author Report Share Posted March 24, 2011 finish em off powder coating hands down the best in sac.. 916-807-5228 Ask for Eric 916-807-5229 Ask for Sonny.. they roll the finders for my boy that does all those donks i was tellin you about. finish em off info or if you wanna do it ghettofab i got a grinder to cut the lip of the fender. That might not be a bad idea..... Quote Alpine CDA-117...Memphis 16-X03 CDT Audio SQA-4100...SEAS Prestige H1396...Crescendo MP-6 Soundstream Rubicon 1.2500d...Digital Designs 3512f Link to comment Share on other sites More sharing options...
n8ball2013 Posted March 24, 2011 Report Share Posted March 24, 2011 if you do cut or grind them you now have to worry about paint chipping. Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
BassJunkie Posted March 24, 2011 Report Share Posted March 24, 2011 (edited) Two guys...Heatgun...baseball bat...good angled driveway.. I would NOT do the crimp thing like that video shows, I would imagine you would be able to see where you clamped it when looking at your car at an angle Edited March 24, 2011 by BassJunkie Quote 1986 C20 Suburban 9 American Bass XFL 15's B2 M1MKII 14v XS Power Batteries Maxwell Caps Acoustical energy is free. Electrical energy is not you havent lived until you've hit a screw with a router. Link to comment Share on other sites More sharing options...
SQMonte Posted March 24, 2011 Author Report Share Posted March 24, 2011 Good point n8.....the baseball bat thing scares me, too much room for error. Driven Authority will do it for me for $90 so I think I'm just gonna let them do it......I will be taking pics of my quarter panels as soon as I hand them the keys though so just in case they mess up they can't deny it. Quote Alpine CDA-117...Memphis 16-X03 CDT Audio SQA-4100...SEAS Prestige H1396...Crescendo MP-6 Soundstream Rubicon 1.2500d...Digital Designs 3512f Link to comment Share on other sites More sharing options...
SQMonte Posted March 24, 2011 Author Report Share Posted March 24, 2011 (edited) dbl post ftl Edited March 26, 2011 by SQMonte Quote Alpine CDA-117...Memphis 16-X03 CDT Audio SQA-4100...SEAS Prestige H1396...Crescendo MP-6 Soundstream Rubicon 1.2500d...Digital Designs 3512f Link to comment Share on other sites More sharing options...
BassJunkie Posted March 26, 2011 Report Share Posted March 26, 2011 Good point n8.....the baseball bat thing scares me, too much room for error. Driven Authority will do it for me for $90 so I think I'm just gonna let them do it......I will be taking pics of my quarter panels as soon as I hand them the keys though so just in case they mess up they can't deny it. Yeah I forgot to add balls of steel to the list of things you need to do it lol ...when I get my springs on I'll see if I have the nuts to do it..I'll post a vid if I do...might be funny to see me shred the fenders of my car lol Quote 1986 C20 Suburban 9 American Bass XFL 15's B2 M1MKII 14v XS Power Batteries Maxwell Caps Acoustical energy is free. Electrical energy is not you havent lived until you've hit a screw with a router. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.