skittlesRgood Posted March 29, 2011 Report Share Posted March 29, 2011 (edited) this shouldnt be a problem on any 4channel as long as channels 1 and 2 are seeing the same loads. same thing with 3 and 4. but the 2 pairs can be different. Edited March 29, 2011 by skittlesRgood Quote If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people. Link to comment Share on other sites More sharing options...
crunkjuice1 Posted March 29, 2011 Report Share Posted March 29, 2011 To be safe ask someone from DC Quote Link to comment Share on other sites More sharing options...
bumonskateboard6 Posted March 29, 2011 Report Share Posted March 29, 2011 This is in the DC board I'm waiting on my 175.4 to come in but I'd say you're good to go: http://www.stevemeadedesigns.com/board/topic/103768-question-about-wiring-the-1754/ Quote Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also? Link to comment Share on other sites More sharing options...
OrionStang Posted March 29, 2011 Author Report Share Posted March 29, 2011 Thanks. I knew I saw something about it. Just lazy to search too much. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
wizart383 Posted March 29, 2011 Report Share Posted March 29, 2011 Should be good Quote Link to comment Share on other sites More sharing options...
MrSkippyJ Posted March 29, 2011 Report Share Posted March 29, 2011 Yes it absolutely will be fine. Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
dugee81 Posted March 29, 2011 Report Share Posted March 29, 2011 i have my front channels @ 4 ohm and the back ones at 1, powerbass 600x4. i have enough battery to keep it constant @ 14.4 volts though.. you should be fine. Quote 200a alt. by Excessive Amperage hc800 under hood & 2 Deka 9a31 in rear 1/0awg + big 3 SAZ 3000D HDC3 18" @ 2 ohm Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.