Jump to content

using diodes to step up voltage


Recommended Posts

the pcm regulates it

Man I really appreciate your time. I came up w/ the same conclusion, I think the key is what you said up there. I think I'd have to wire in some sort of by-pass to the pcm. If I knew more about electronics, I'd say it could be done. But unfortunately I don't, so I'LL probably end up having to go with a mod from MLA. I know I really could use that extra voltage.

Just run the field wire of the regulator thru a potentiometer like a 0-1k and then you can adjust your voltage with a knob. And the other end of the wire direct to the alt stud, 12V+. That will put the alt in full field and bypass the pcm and regulator and then you adjust your set point with the knob.

TEAM SOUNDQUBED -- TEAM SOUTH

TEAM S.O.B. - Founder & Captain

3x Streetbeat World Record Holder

2017 MWSPL 1st place Mayhem & 4th Xtreme 4 
2016 MWSPL 1st place Mayhem/2nd Adv 4/2nd Xtreme 4
2015 MWSPL 2nd place Mayhem & 4th Xtreme 4
2014 USACI 2nd place Streetbeat 5 - 162.6 db
2014 MWSPL 2nd place Xtreme 4 - 144.9 db
2013 USACI 1st place Streetbeat 4 - 161.9 db
2013 USACI 1st place Street Q+ - 162.8 db
2013 MWSPL 3rd Kaos2 & 4th Xtreme 4
2011 USACI 2nd place MOD 1001-2k - 160.0 db
2011 MWSPL 4th place: Adv3 - 157.8 db, Kaos2 - 150s db, Xtreme4 - 140s db
2010 ARSPL 1st place 501-750 - 160.3 db Arkansas loudest

Best score to date 164.4 db - Termlab Outlaw

Streetbeat 4 - 161.9 db

Streetbeat 5 - 162.6 db

MWSPL on Dash Legal door open (Music) - 162.5 db

Sealed on dash Legal (Music) - 161.1 db - Termlab

THE BLACK NASTY CURRENT BUILD & FAB

The Black Nasty (6) 15 Rebuild Log 2012

(4) 15 Walled Sierra Build Log

Evo X build log

Facebook page The Black Nasty

16163044_large.gif

Link to comment
Share on other sites

altdia10.jpg

:peepwall:

TEAM SOUNDQUBED -- TEAM SOUTH

TEAM S.O.B. - Founder & Captain

3x Streetbeat World Record Holder

2017 MWSPL 1st place Mayhem & 4th Xtreme 4 
2016 MWSPL 1st place Mayhem/2nd Adv 4/2nd Xtreme 4
2015 MWSPL 2nd place Mayhem & 4th Xtreme 4
2014 USACI 2nd place Streetbeat 5 - 162.6 db
2014 MWSPL 2nd place Xtreme 4 - 144.9 db
2013 USACI 1st place Streetbeat 4 - 161.9 db
2013 USACI 1st place Street Q+ - 162.8 db
2013 MWSPL 3rd Kaos2 & 4th Xtreme 4
2011 USACI 2nd place MOD 1001-2k - 160.0 db
2011 MWSPL 4th place: Adv3 - 157.8 db, Kaos2 - 150s db, Xtreme4 - 140s db
2010 ARSPL 1st place 501-750 - 160.3 db Arkansas loudest

Best score to date 164.4 db - Termlab Outlaw

Streetbeat 4 - 161.9 db

Streetbeat 5 - 162.6 db

MWSPL on Dash Legal door open (Music) - 162.5 db

Sealed on dash Legal (Music) - 161.1 db - Termlab

THE BLACK NASTY CURRENT BUILD & FAB

The Black Nasty (6) 15 Rebuild Log 2012

(4) 15 Walled Sierra Build Log

Evo X build log

Facebook page The Black Nasty

16163044_large.gif

Link to comment
Share on other sites

altdia10.jpg

:peepwall:

Hmm, kinda seems like it may just work. Unless anyone can tell me why it wont, I'll try it. Gotta get a potentiometer.

Either way, thank you all for your time.

Man it'd be nice for this to work!


Kickin' Cruiser

Seller Feedback


Stage 3
Dash, Door Panels,
4th Order wall 4 - 15's
on a DC 5.0K 2 DC 5.0K's


Solo X 15 (v.2) Sub Build

Link to comment
Share on other sites

Just be careful when you put an alt into full field mode it can ramp voltage up to 18+ so if your voltage continues to climb to 16+ just dial that pot up some and just monitor your voltage always.

TEAM SOUNDQUBED -- TEAM SOUTH

TEAM S.O.B. - Founder & Captain

3x Streetbeat World Record Holder

2017 MWSPL 1st place Mayhem & 4th Xtreme 4 
2016 MWSPL 1st place Mayhem/2nd Adv 4/2nd Xtreme 4
2015 MWSPL 2nd place Mayhem & 4th Xtreme 4
2014 USACI 2nd place Streetbeat 5 - 162.6 db
2014 MWSPL 2nd place Xtreme 4 - 144.9 db
2013 USACI 1st place Streetbeat 4 - 161.9 db
2013 USACI 1st place Street Q+ - 162.8 db
2013 MWSPL 3rd Kaos2 & 4th Xtreme 4
2011 USACI 2nd place MOD 1001-2k - 160.0 db
2011 MWSPL 4th place: Adv3 - 157.8 db, Kaos2 - 150s db, Xtreme4 - 140s db
2010 ARSPL 1st place 501-750 - 160.3 db Arkansas loudest

Best score to date 164.4 db - Termlab Outlaw

Streetbeat 4 - 161.9 db

Streetbeat 5 - 162.6 db

MWSPL on Dash Legal door open (Music) - 162.5 db

Sealed on dash Legal (Music) - 161.1 db - Termlab

THE BLACK NASTY CURRENT BUILD & FAB

The Black Nasty (6) 15 Rebuild Log 2012

(4) 15 Walled Sierra Build Log

Evo X build log

Facebook page The Black Nasty

16163044_large.gif

Link to comment
Share on other sites

If anyone can help me find the Sense wire for an 01 altima, or any 240sx nissan hardbody with a KA 2.4L i would be greatly appreciative

the plug has two yellow wires,one with a black stripe and one with a red stripe.

i already pm'ed you with that. i cant find no alt wiring diagram online so i told you to look into the haynes or chilton manuals and you did but you didnt look in the right spot i take it. they both have diagrams for all wiring in the vehicle. you just have to look it up in the book and go to the right page and look for the sense "S" wire and thats all you need unless its like purple's pt

2015 silverado crew cab

nothing atm but soon...

Link to comment
Share on other sites

Dose it work on a 1998 ford zx2

2 12" Jeff Vue Customs
1 set MB Quart FSB 216 in doors
1 American Bass 100.1 on sub
1 Hertz EP2 on doors
JVC deck IPOD control
Stock 105 amp alt
DD-1
big 3
new build in Chevy caviler http://www.stevemead...chevy-cavalier/

last set up in the ZX2 http://www.stevemead...-current-build/


old build log http://www.stevemead...-1998-ford-zx2/

Gold is the money of kings, silver is the money of gentlemen, debt is the money of slaves. Just my .02c

that shop needs keep those doors open so they have to charge for it

if people think 10k is a lot then they should get into other hobbies.. like masturbating, cause any hobby cost money to maintain

Lol no, I'm smarter than that bro haha. Fool me once, shame on you, fool me twice..............go fuck yourself lol

Link to comment
Share on other sites

If anyone can help me find the Sense wire for an 01 altima, or any 240sx nissan hardbody with a KA 2.4L i would be greatly appreciative

the plug has two yellow wires,one with a black stripe and one with a red stripe.

i already pm'ed you with that. i cant find no alt wiring diagram online so i told you to look into the haynes or chilton manuals and you did but you didnt look in the right spot i take it. they both have diagrams for all wiring in the vehicle. you just have to look it up in the book and go to the right page and look for the sense "S" wire and thats all you need unless its like purple's pt

I spent a good 20minutes looking in that area and found nothing on the wires that the plug hold, and All Data also shows nothing for what wire is what.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...