Jump to content
Sonic Electronix

Reason why the SMD disortion listener needs to come out now.. lol


Recommended Posts

http://www.youtube.com/watch?v=d2BvAiM-jVk



Thanks to the sealed box I didnt notice.. which sucks because it was temporary. Made that box a while ago, and I just got a nice design for the new one here on these forums lol.
Even ran around checked fuses, wires. nothing. then I kind of noticed the smell heh.. and well.. you see.

Heres the vid leading up to it.. Never had a problem the amp light was on but no bass all of a sudden lol.
And that 3rd switch is for my subs amp so I shouldnt of bothered checking the fuses as it never shut off.
I just put the switches in and turned my bass up. A. Maybe the switch for the sub amp was a bad idea (it gets really hot) B. Maybe I shouldnt of turned the bass up, had no problems till today.
And I wasnt even playing it loud at all.. ;(
Btw my camera sucks camel dicks. My phone even picks up sound better. On the camera it sounds like.. static electricity..

http://www.youtube.com/watch?v=2TgNsAVnn_g


Well.. Anyways, time to attempt to send it to the manufacturer since its still covered. Edited by JMac91

Vehicle: 2002 Volvo S60 2.4t awd.
Headunit: Kenwood DDX-470
Doors: 4x Focal 6.5s/tweets (Adding)
Sub: 2x Sundown Zv4 12's D1
Amps: B2 Zero.1, MB Quart OA600.4
Box: 5.2ish @ 32, Made with Maple, solid oak braces, 45s all around, 2x 5.8" pipes, all fiberglassed up.
Battery: XS D3100, Block Shakers 110AH
Alternator: 250A Excessive Amperage.

All Sky High OFC Wiring.

My Build, plenty of pics: http://www.stevemeadedesigns.com/board/topic/198281-2002-volvo-s60-awd-24t-build-log/

Link to comment
Share on other sites

"think i just fried my subs" i think you are correct sir!

Well.. Just maybe.. lol

Dearborn eh? You know where Lapeer is?

Vehicle: 2002 Volvo S60 2.4t awd.
Headunit: Kenwood DDX-470
Doors: 4x Focal 6.5s/tweets (Adding)
Sub: 2x Sundown Zv4 12's D1
Amps: B2 Zero.1, MB Quart OA600.4
Box: 5.2ish @ 32, Made with Maple, solid oak braces, 45s all around, 2x 5.8" pipes, all fiberglassed up.
Battery: XS D3100, Block Shakers 110AH
Alternator: 250A Excessive Amperage.

All Sky High OFC Wiring.

My Build, plenty of pics: http://www.stevemeadedesigns.com/board/topic/198281-2002-volvo-s60-awd-24t-build-log/

Link to comment
Share on other sites

"reason why you need to get a DMM and learn how to set gains."

If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood.

Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s.

http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/

Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build

Yeah. im pretty sure they dont warranty retarded people.

Link to comment
Share on other sites

"reason why you need to get a DMM and learn how to set gains."

Why, its kind of obvious I set gains like a champ.

Plus I havent had these up too loud, I was patiently waiting for the smd device.. until i just got bored

i do know where lapeer is

Sweet.. Who wants to know where Lapeer is tho anyways.. haha

Im in Dearborn right now! Up at HFCC

Wow, im impressed by all the people from michigan, normally I dont bump into too many online.

Vehicle: 2002 Volvo S60 2.4t awd.
Headunit: Kenwood DDX-470
Doors: 4x Focal 6.5s/tweets (Adding)
Sub: 2x Sundown Zv4 12's D1
Amps: B2 Zero.1, MB Quart OA600.4
Box: 5.2ish @ 32, Made with Maple, solid oak braces, 45s all around, 2x 5.8" pipes, all fiberglassed up.
Battery: XS D3100, Block Shakers 110AH
Alternator: 250A Excessive Amperage.

All Sky High OFC Wiring.

My Build, plenty of pics: http://www.stevemeadedesigns.com/board/topic/198281-2002-volvo-s60-awd-24t-build-log/

Link to comment
Share on other sites

"reason why you need to get a DMM and learn how to set gains."

Why, its kind of obvious I set gains like a champ.

Plus I havent had these up too loud, I was patiently waiting for the smd device.. until i just got bored

i do know where lapeer is

Sweet.. Who wants to know where Lapeer is tho anyways.. haha

Im in Dearborn right now! Up at HFCC

Wow, im impressed by all the people from michigan, normally I dont bump into too many online.

i go to school at HFCC !!!

Link to comment
Share on other sites

Heh.. well luckily theres an authorized dealer in flint at best buy.. (oh boy) That will honor the warrantee. Only the next city over :good:

Hopefully all goes well, they replace and actually fix them for free.. and im back in business.

Vehicle: 2002 Volvo S60 2.4t awd.
Headunit: Kenwood DDX-470
Doors: 4x Focal 6.5s/tweets (Adding)
Sub: 2x Sundown Zv4 12's D1
Amps: B2 Zero.1, MB Quart OA600.4
Box: 5.2ish @ 32, Made with Maple, solid oak braces, 45s all around, 2x 5.8" pipes, all fiberglassed up.
Battery: XS D3100, Block Shakers 110AH
Alternator: 250A Excessive Amperage.

All Sky High OFC Wiring.

My Build, plenty of pics: http://www.stevemeadedesigns.com/board/topic/198281-2002-volvo-s60-awd-24t-build-log/

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 1 Anonymous, 1996 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...