Supercharged DCs Posted April 16, 2011 Report Posted April 16, 2011 Trying to plan a box for my 3515. I want it to sound good, hit the lows, and still put some numbers on the TL (maybe win a competition or two ) Also, I'm trying to plan a custom center console box for a DDW6.5 The 3515 will be off a AQ2200, the DDW6.5 haven't decided what amp to run... How does this all sound? Also, wasn't sure on bracing displacement, so put in .25 for a estimated guess. I will be putting 2 1" dowel rods in a + formation. Will it be more or less than I figured? Thanks for the help Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
zayres29 Posted April 16, 2011 Report Posted April 16, 2011 i dont think that dowel will take up .25 but your design looks ok to me Btw that was the first person. Ever banned by me while dropping a deuce. Feel privileged
Supercharged DCs Posted April 17, 2011 Author Report Posted April 17, 2011 Do you know of a way to figure out bracing displacement from the rods? I'm having a brain fart and can't think of anything lol... Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
iKidwell Posted April 17, 2011 Report Posted April 17, 2011 I'd do more around 36hz or so tuning..dd's like a little higher and still get down on the lows c'mon now, if i was shooting an 8 year old, it wouldnt be MY 8 year old. i recently got a Pyle PL1590BL and i was building an enclosure for it tuned to 25 hz. i didn't have any tools to cut a circle so i hit it with a big hammer. 2003 Infiniti G35 Sport Sedan Build in Progress
Supercharged DCs Posted April 17, 2011 Author Report Posted April 17, 2011 My current one is 4.5ft^3 tuned to 35hz, maybe it's cause it's only on 200w but it seems like it wants lower tuning lol. Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
iKidwell Posted April 17, 2011 Report Posted April 17, 2011 I had 2 3512's off of 2.5k Rms in a 4.5 cube box tuned at 38hz and they played down to 30hz with ease.. c'mon now, if i was shooting an 8 year old, it wouldnt be MY 8 year old. i recently got a Pyle PL1590BL and i was building an enclosure for it tuned to 25 hz. i didn't have any tools to cut a circle so i hit it with a big hammer. 2003 Infiniti G35 Sport Sedan Build in Progress
jmilch Posted April 17, 2011 Report Posted April 17, 2011 Do you know of a way to figure out bracing displacement from the rods? I'm having a brain fart and can't think of anything lol... Probably no more than .10-.15 displacement max. Pioneer AVH-P4300DVD | Hertz 6.5 | Alpine Type R 6x9 | Custom 200A Alt | Knu Flek 1/0 Big 3 and all wiring | Eclipse EA3422 | AudioQue 2200d | DC XL 12 | Red Oak Box ~2.8 cubes @ 30 hz |
Supercharged DCs Posted April 17, 2011 Author Report Posted April 17, 2011 Hm, may very well tune it a bit higher than Noob question, but would adding more power to the sub make it hit lower? Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
zayres29 Posted April 17, 2011 Report Posted April 17, 2011 pi*r^2*l is the formula for a cylinder Btw that was the first person. Ever banned by me while dropping a deuce. Feel privileged
Recommended Posts
Archived
This topic is now archived and is closed to further replies.