quest for 140

[MACnonsence6]

so ive got a pair of older re se 12s with fi recones. and an ap1800. so far ive been playing around with torres and im trying to figure out what i should tune my box to or what type of box i should be making to get these subs as loud as possible off of the power theyll be getting. i really want 140s with this set up im looking for advice to obtain my goal

Edited April 20, 2011 by hifonics10

[mazdaspl]

Well we would need more info.. What kind of car? or suv?

Jay

[Robert8252]

4ish cubes net. 14-16 of port per cube. Should do it in almost any car if the box is built good.

[MACnonsence6]

its gona be in a 98 neon trunk sealed subs facing into cabbin ill get my torres and take a screen shot brb

Edited April 20, 2011 by hifonics10

[fecupe2001]

You should be in the 40´s with that equipment without much problems, wait for someone that have used those subs for an input, i haven´t work for them, but something like 4 cubic feet and 60SQ of port should work nicely i guess...

[Skullz]

You'll need more port than that for those subs, use 2 5" ports 15" long tuned to 35hz and you should be good for almost everything.

[MACnonsence6]

i was orignally planning to have no bracing sept a double baffle do you guys think id be fine with out any bracing or no?

[fecupe2001]

for a pair of 12´s on small power i think it´s a waste of wood getting a double baffle, i would only use some nice bracing and that´s it, but yes a double baffle should work great

[zayres29]

you should tune a tad bit higher like 35 as stated above a lot of people think to be able to play lows you have to tune to 3hz music HARDLY EVERY goes below mid 30s and it will also make 40s easier

[walled01alero]

Good luck man.