Supercharged DCs Posted April 22, 2011 Report Posted April 22, 2011 This is what I came up with. I have a box already, but it's not braced at all and I'm about to throw an AQ2200 on my 15" Im not good with numbers at all, so I need to know what cuts to make for the port. Can someone please help, I will love you forever Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
fecupe2001 Posted April 22, 2011 Report Posted April 22, 2011 If your box it´s 18" height then the port it´s 16.5" height since you are using 3/4" wood, just saying... I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/
ChevyBoy95 Posted April 22, 2011 Report Posted April 22, 2011 yea, 16.5 is the port height. Width - 43 (changed it to keep almost same tuning along with box's cubic ft) Height - 18 Depth - 16 Port Height - 16.5 Port Width - 4 Port area 66sq in (16.1 sqin per cube) Tuned to 34.85Hz after same displacements and port location as the pic above. Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/
Supercharged DCs Posted April 22, 2011 Author Report Posted April 22, 2011 Alright man, thanks And yeah fecupe, now that you mention it I realize my dumbass mistake lol Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
fecupe2001 Posted April 22, 2011 Report Posted April 22, 2011 hehe it´s ok bro I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/
Supercharged DCs Posted April 23, 2011 Author Report Posted April 23, 2011 Now can someone please tell me what the dimensions are for the several pieces of MDF I need to cut to make the port? I seriously need help lol! Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
Supercharged DCs Posted April 24, 2011 Author Report Posted April 24, 2011 yea, 16.5 is the port height. Width - 43 (changed it to keep almost same tuning along with box's cubic ft) Height - 18 Depth - 16 Port Height - 16.5 Port Width - 4 Port area 66sq in (16.1 sqin per cube) Tuned to 34.85Hz after same displacements and port location as the pic above. Bump. Can someone help me figure out cut sheet for the above design? Will be greatly appreciated Also, What would you guys suggest to get the loudest in my truck. Port front sub front is how my current box is. I wanna get the most outta my DD 3515, will be running an AQ 2200d. Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.