Jump to content
DC Sound Lab

Recommended Posts

Posted (edited)

Was playing my system on the way home today and started to hear another noise. Thought it was the dust cap again coming loose since i just re-glued it last night. When i got home i took a look at it and the dust cap seems coo. Press in on the woofer and you can hear a "air" noise, then at the bottom of the travel it sounds like a "creak". Not sure what it is, but doesnt sound good at all. Here is a video and hopefully you can hear waht im talking about

http://s277.photobucket.com/albums/kk66/2006yukon/?action=view&current=MVI_0538.mp4

Edited by matt14

2006 GMC Yukon
Pioneer HU

SHCA ran throughout

Crescendo BC3500

One 18 AA Mayhem in a 4th order

ZED Levithian 6 channel

Rainbow Dual 6.5 comps ran Active
matt142-1-1.jpg
http://www.stevemeadedesigns.com/board/topic/155628-matt14s-yukon-mayhem-in-a-4th-ordernew-amps-and-bats/page-3

Posted

Video link is messed up mate, but from the sounds of it it may be blown.

Bassless once again. Can't seem to keep a system for more than a few weeks :)

Saving for a '06 Nissan 350z, look for build around June 2012.

Posted

Was playing my system on the way home today and started to hear another noise. Thought it was the dust cap again coming loose since i just re-glued it last night. When i got home i took a look at it and the dust cap seems coo. Press in on the woofer and you can hear a "air" noise, then at the bottom of the travel it sounds like a "creak". Not sure what it is, but doesnt sound good at all. Here is a video and hopefully you can hear waht im talking about

http://s277.photobucket.com/albums/kk66/2006yukon/?action=view&current=MVI_0538.mp4

dam bro already??? i remember beating the breaks off 2 of those in my buddies volvo wagon with a fosgate t4k.

I Rock 4 Doors 4 More Whores!

SMD SUPER SELLER

my seller feedback http://www.stevemead...-mama-feedback/

more seller feedback http://www.stevemead...-slaps-yo-mama/

Posted

Yea i know. I just got it going last week and have been breaking it in this whole week, trying not to pound on it to hard. I scoped the gains and everything, dont know what happened.

2006 GMC Yukon
Pioneer HU

SHCA ran throughout

Crescendo BC3500

One 18 AA Mayhem in a 4th order

ZED Levithian 6 channel

Rainbow Dual 6.5 comps ran Active
matt142-1-1.jpg
http://www.stevemeadedesigns.com/board/topic/155628-matt14s-yukon-mayhem-in-a-4th-ordernew-amps-and-bats/page-3

Posted

Was just watching a video on youtube about how to re-cone a sub. After some thinking, do you think that it may be possible that when I cleaned off some the adhesive from the dust cap last night, some of the debris may have got down into the coil? Could this be my noise?

The dust cap starting coming apart last friday on my way back from work. I ordred a new cap and glue from DC on monday and got the parts yesturday. On my way home from work i was playing my system and the dust cap just flew off. When i got home, i cleaned off some of the adhesive and isntall the new cap, and let sit overnight with about 5lbs on the cap ( about 12hours ). When i went into the car this morning, I heard a little noise at low volume and thought it was the cap diddnt seal all the way. Then today, got worse and now this is were im at. Could it be possible that i just have some adhesive in the coil? Regradless i would have to re-cone it anyways, but just would like to know.

2006 GMC Yukon
Pioneer HU

SHCA ran throughout

Crescendo BC3500

One 18 AA Mayhem in a 4th order

ZED Levithian 6 channel

Rainbow Dual 6.5 comps ran Active
matt142-1-1.jpg
http://www.stevemeadedesigns.com/board/topic/155628-matt14s-yukon-mayhem-in-a-4th-ordernew-amps-and-bats/page-3

Posted

It sounds like something dropped into the coil area...even dust being in there (dust cap being the name) can cause the coil to rub like that. Also putting a 5 pound weight on it may have jammed the coil down and damaged it.

Current Systems:

2011 BMW 335i

Hertz HDP1

DC LVL3 12" Full Carbon Fiber

2002 Acura Tl
Kenwood DNX9980HD
2 DCLVL4 12" Subs with LVL5 Parts D.7 Coils
DC 3.5k
Hertz HSK-165 up front HCX-165 Rear
Hertz HDP4 Amp
DC Power Engineering 260 Amp Alt
Big 3 and amp powered with KNU 1/0
XS Power D2400 Up Front

i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch...

going over rms = smaller box, under rms = bigger box...

Low voltage doesn't blow amps. That's a myth.

A router that does the sub holes makes rounded edges also?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 756 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...