Jump to content

1999 Audi A4th order Trunk Build Video Pg 7


Recommended Posts

They're pitch black in the daylight

1999 Audi A4 1.8T:::

4 - DC Level 3 10's in a 4th order

Rockford P6002 on Subs for now (3-3.5k coming eventually)

MB Quart ONX4.60 for Mids and Highs

Boston S50 Components in Front

Boston S65 Coaxials in Rear

40 Sq Ft of Second Skin Damplifier

Build Thread

UBL

1948 Plymouth

Link to comment
Share on other sites

I used VHT nightshades. It's sold at all auto parts stores.

1999 Audi A4 1.8T:::

4 - DC Level 3 10's in a 4th order

Rockford P6002 on Subs for now (3-3.5k coming eventually)

MB Quart ONX4.60 for Mids and Highs

Boston S50 Components in Front

Boston S65 Coaxials in Rear

40 Sq Ft of Second Skin Damplifier

Build Thread

UBL

1948 Plymouth

Link to comment
Share on other sites

no its just the tint spray. i spray a few thin coats of that to get it as dark as i want. then wait for it to dry and wet sand it then do a layer of clear wait for it to dry and wetsand, and do that a few times to get a nice thick coat of clear. then wetsand and polish

1999 Audi A4 1.8T:::

4 - DC Level 3 10's in a 4th order

Rockford P6002 on Subs for now (3-3.5k coming eventually)

MB Quart ONX4.60 for Mids and Highs

Boston S50 Components in Front

Boston S65 Coaxials in Rear

40 Sq Ft of Second Skin Damplifier

Build Thread

UBL

1948 Plymouth

Link to comment
Share on other sites

I'm considering doing a little change of plans with the subs. instead of getting 2 more level 3's im thinking about selling the 2 i have now and getting 4 of these guys frontview_small.jpg

what do you think? theyll handle about the same power if not a little more than the level 3's and they have an fs of 26.6Hz. once i get my laptop back ill plot them both in bbp6 and see which one would do better in my box

1999 Audi A4 1.8T:::

4 - DC Level 3 10's in a 4th order

Rockford P6002 on Subs for now (3-3.5k coming eventually)

MB Quart ONX4.60 for Mids and Highs

Boston S50 Components in Front

Boston S65 Coaxials in Rear

40 Sq Ft of Second Skin Damplifier

Build Thread

UBL

1948 Plymouth

Link to comment
Share on other sites

i think its like $10 per can. and i tinted my taillights twice and my side markers with one can and still have plenty left.

and i heard a lot of good things about the skars but i just want to see how they would do in my box before i buy them

1999 Audi A4 1.8T:::

4 - DC Level 3 10's in a 4th order

Rockford P6002 on Subs for now (3-3.5k coming eventually)

MB Quart ONX4.60 for Mids and Highs

Boston S50 Components in Front

Boston S65 Coaxials in Rear

40 Sq Ft of Second Skin Damplifier

Build Thread

UBL

1948 Plymouth

Link to comment
Share on other sites

Go for it, those subs will handle the power with ease, more than the lvl 3's. Just look at the skars as sa series, they are real similar.

Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell

Kenwood H/U

1/0 wire,

136 amp alt 200 ah batteries 12.7 daily

2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts

Mb quart 125.4 wired to 4 aura 6's

3.6 cube box tuned to 36 plays down to 23hz

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 1289 Guests (See full list)

×
×
  • Create New...