corey0928 Posted July 1, 2011 Report Posted July 1, 2011 Low pass around 8O Subsonic 28 Bass 0 Phase 0 Level should be set to whatever the preout voltage is of your head unit Quote
LoudBimmer Posted July 1, 2011 Author Report Posted July 1, 2011 Low pass around 8O Subsonic 28 Bass 0 Phase 0 Level should be set to whatever the preout voltage is of your head unit i think level is same as gain here Quote
photochrisb931 Posted July 1, 2011 Report Posted July 1, 2011 And a little bit more FYI. It may be worth investing in an O-scope or the SMD dd-1 distortion detector. That will help clean up the sound and very well may take care of the overheating problem. My Zapco before o-scope would fry eggs and clip after gets warm and plays clean. Quote Barstad
LoudBimmer Posted July 1, 2011 Author Report Posted July 1, 2011 i turn gain down just a lil bit, but amp still get's hot so do subs little bit. By ear, i don't hear any clipping, it plays clean. From what i heard, hifonics suppose to get hot? Quote
corey0928 Posted July 1, 2011 Report Posted July 1, 2011 You can't hear clipping. The amp or subs shouldn't get hot if you aren't having major voltage drop or clipping Quote
252chevyboyz Posted July 1, 2011 Report Posted July 1, 2011 (edited) I have read over the link that is below quite a few times and seems to pretty helpful for settings gains on an amp. Hope the link can help and congrats on getting that ski hole opened up How to Properly Set Gains Edited July 1, 2011 by 252chevyboyz Quote - 1997 Chevy Tahoe- Big 3 (1/0)- Dual Autocraft Batts- JVC KD-A315 HU- AQ 2200.1D- 18" AQ HDC3- Box w/ Removable Port (6ft^3 @ 36hz & 6.7ft^3 @ 42hz)- 39' 1/0 & 13' 2/0 Flex-A-Prene My Selling Feedback Build Log
LoudBimmer Posted July 1, 2011 Author Report Posted July 1, 2011 You can't hear clipping. The amp or subs shouldn't get hot if you aren't having major voltage drop or clipping on juice box-gorilla zoe (defac's version) voltage doesn't drop below 13.5V, and that's on the hardest hits Quote
LoudBimmer Posted July 1, 2011 Author Report Posted July 1, 2011 I have read over the link that is below quite a few times and seems to pretty helpful for settings gains on an amp. Hope the link can help and congrats on getting that ski hole opened up How to Properly Set Gains that video does work for me Quote
corey0928 Posted July 2, 2011 Report Posted July 2, 2011 You can't hear clipping. The amp or subs shouldn't get hot if you aren't having major voltage drop or clipping on juice box-gorilla zoe (defac's version) voltage doesn't drop below 13.5V, and that's on the hardest hits Then you are probably clipping the signal to make both things hot. Turn the gain dowm Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.