SnowDrifter Posted July 1, 2011 Report Posted July 1, 2011 It's summer, I'm bored, and like projects... So, could I make an oscilloscope by taking an Audio Output Transformer from radioshack or something, hooking the 8 ohm side to a 3.5mm jack to plug into my laptop, then wire the 1000 ohm side to an amp or other electronic source, then download a free o-scope application and have it work? My biggest fear with this would be blowing out the audio card in my laptop because it over volted the input or something... ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
fecupe2001 Posted July 2, 2011 Report Posted July 2, 2011 There{s a guy from Spain that built his own o-scope, to bad the video it{s on spanish and i know shit about how to translate it for you, want me to find it for you? I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/
Recommended Posts
Archived
This topic is now archived and is closed to further replies.