awall1022 Posted July 3, 2011 Report Share Posted July 3, 2011 My uncle is willin to sell me his Fusion Jonah Lomu FJL-1211D D Class Amp for 100$. i plan on pushin my FI SSD 15'' with it. i know fusion is a shitty brand but ive done alotta research on this amp and i have never heard one thing bad about it noone as ever posted anything about frying it the only thing people say is it gets hot lookin for a few opinions if anyone knows anything about these amps. Here are the specs on it 14.4 Volt Power Output Specs 800 WRMS x 1 into 4 Ohms 1250 WRMS x 1 into 2 Ohms 1700 WRMS x 1 into 1 Ohm Gold plated audio input and output connections FUTRANZ Efficient Heat Sink design technology F.I.S.T Fusion Intercooled semi conductor technology Variable sub sonic filter 10 Hz - 35 Hz Signal to Noise ration > 90 db RCA output for multi amp installations Direct in 4 gauge gold plated power connector Military spec componentary as standard issue Damping factor > 200 Total Harmonic Distortion 0.05% Variable Low Pass Crossover @ 18 db per octave Variable Phase Shift 0 - 180 Degrees Variable 'Q' Variable Input Adjustment 200mV - 7V RCA Input and Pass Thru Chrome Anti-tamper Cover 5-Way Protection : Thermal, Overload, DC-Offset, Short Circuit, and Reverse Polarity Dimensions (mm)(W) 275 x (L) 365 x (H) 65 lifted trucks gorgeous sluts a pretty face and slammin bass My current Set up Car less I Do Ported Box designs/cutsheets with 3d google sketchup model just PM i would really want an in-depth guide Just flip the fucking thing over Link to comment Share on other sites More sharing options...
awall1022 Posted July 11, 2011 Author Report Share Posted July 11, 2011 alright update. got the amp today and here are some pics Gold plated Connectors For those of you that love amp guts lifted trucks gorgeous sluts a pretty face and slammin bass My current Set up Car less I Do Ported Box designs/cutsheets with 3d google sketchup model just PM i would really want an in-depth guide Just flip the fucking thing over Link to comment Share on other sites More sharing options...
STEvil Posted July 11, 2011 Report Share Posted July 11, 2011 I'd run it at 2 ohms if possible for reliability, or just turn the gain down a bit if you have to run near 1 ohm. Looks like it would 1500w ok, but I wouldnt push it. Decent for $100 though MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed. Link to comment Share on other sites More sharing options...
awall1022 Posted July 11, 2011 Author Report Share Posted July 11, 2011 I'd run it at 2 ohms if possible for reliability, or just turn the gain down a bit if you have to run near 1 ohm. Looks like it would 1500w ok, but I wouldnt push it. Decent for $100 though planned on runnin it at 2 ohms daily for the 1250w so ill probally be ordering my FI in a couple weeks. just standard no options dual 1 and later on when i have the money to upgrade amps i plan to get a second SSD lifted trucks gorgeous sluts a pretty face and slammin bass My current Set up Car less I Do Ported Box designs/cutsheets with 3d google sketchup model just PM i would really want an in-depth guide Just flip the fucking thing over Link to comment Share on other sites More sharing options...
ktraughb Posted July 11, 2011 Report Share Posted July 11, 2011 These were awesome and very expensive amps when they came out. All the jonah lomu series were highly regarded and durable. Link to comment Share on other sites More sharing options...
bsumpter Posted July 15, 2011 Report Share Posted July 15, 2011 I'll take it if you wanna sell it. It would match my other one, lol. Link to comment Share on other sites More sharing options...
awall1022 Posted July 15, 2011 Author Report Share Posted July 15, 2011 I'll take it if you wanna sell it. It would match my other one, lol. id buy your other one if you wanna sell it lifted trucks gorgeous sluts a pretty face and slammin bass My current Set up Car less I Do Ported Box designs/cutsheets with 3d google sketchup model just PM i would really want an in-depth guide Just flip the fucking thing over Link to comment Share on other sites More sharing options...
bsumpter Posted July 16, 2011 Report Share Posted July 16, 2011 Does he have the case that it came in lol, i bought two brand new. Sold one now i wish i didn't. Link to comment Share on other sites More sharing options...
deathcards Posted July 16, 2011 Report Share Posted July 16, 2011 i wouldn't mind one for $100 jking skar sk2500.1 0 gauge power and ground kunukonceptz alpine HUvxi65 components on BA gt-275new build log -> http://www.stevemeadedesigns.com/board/topic/150642-project-d-kon-deathcards-build-log/#entry2148821 2 x-15 sundowns singer alt, odyssey bat, and maxwell ultra caps Link to comment Share on other sites More sharing options...
awall1022 Posted July 16, 2011 Author Report Share Posted July 16, 2011 Does he have the case that it came in lol, i bought two brand new. Sold one now i wish i didn't. yeah he doese he is bringin it over today and the top chrome panel lifted trucks gorgeous sluts a pretty face and slammin bass My current Set up Car less I Do Ported Box designs/cutsheets with 3d google sketchup model just PM i would really want an in-depth guide Just flip the fucking thing over Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.