fecupe2001 Posted July 15, 2011 Report Share Posted July 15, 2011 45´s suck ass IMO, after i tested them i said i´ll never use them again on a daily box. About my idea, well, i totally understand your point about your application been way different than mine, but if you guys have gotten way better results with the triangle instead of my idea, why bother? Orion, you already got GREAT inputs, this is a one side decision for sure now, no reason for me to test this so i can help you out making a decision, but now you got me very curious lol, i wanna try that triangle in a box with the squared tip, let me see if i can find a box to test that thing Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
OrionStang Posted July 15, 2011 Author Report Share Posted July 15, 2011 I'm taking my wife to see Harry Potter, then i'm gonna attempt to make the flat triangle. Do you guys think I should leave the 45's (at port entry) out? I don't use them anywhere else anyway. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
fecupe2001 Posted July 15, 2011 Report Share Posted July 15, 2011 (edited) I would only use them on the pressure points of the box , if you use 45´s on the back corners i think you would mess a little bit with the airflow since the opening isn´t that big, i would use them here only if it´s a sub back/port back box, if it´s a sub up/port back box then it´s totally different Edited July 15, 2011 by fecupe2001 Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
optical Posted July 15, 2011 Report Share Posted July 15, 2011 i would also keep them at the same corner as fecupe said it will further more secure that L port and if its subs up port back i would put it on the bottom of the box horizontal facing the back of the box Quote Link to comment Share on other sites More sharing options...
fecupe2001 Posted July 15, 2011 Report Share Posted July 15, 2011 i would also keep them at the same corner as fecupe said it will further more secure that L port and if its subs up port back i would put it on the bottom of the box horizontal facing the back of the box You are right my friend, but i´m pretty sure it´s subs back/port back since he has double baffle without the top plate of the box attached yet Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
OrionStang Posted July 15, 2011 Author Report Share Posted July 15, 2011 Its actually subs/port forward Thanks for the tips guys. I gotta figure out how to make 45's with a jigsaw. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
ktraughb Posted July 15, 2011 Report Share Posted July 15, 2011 eeek! with a jigsaw? dont cut off your fingers. itll be tough to get a smooth flat edge via jigsaw. the blade is very flexible. Quote Link to comment Share on other sites More sharing options...
fecupe2001 Posted July 15, 2011 Report Share Posted July 15, 2011 Dont get 45´s , rounding over with PVC worked way better for me, it´s also easier if you don´t have a table saw or something like that , just cut a 4" pvc tube into 4 pieces, use 2 of them for those corners and sell the other two lol Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
fecupe2001 Posted July 15, 2011 Report Share Posted July 15, 2011 Dont get 45´s , rounding over with PVC worked way better for me, it´s also easier if you don´t have a table saw or something like that , just cut a 4" pvc tube into 4 pieces, use 2 of them for those corners and sell the other two lol Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
mlstrass Posted July 15, 2011 Report Share Posted July 15, 2011 had a box like that with 2 18's and later added a triangle on the back wall at the end fo the port. ZERO gain on the TL, so we took it back out Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.