MarcoCaparrotta Posted July 18, 2011 Report Share Posted July 18, 2011 Hey everyone, I just bought 2 12" jlw7's. They are each SVC 3ohm. I was told there is no way to connect them to my amp without frying it. my amp is a kicker zx750.1, 750watts at 2ohms. Please help me out yall, will it fry my amp? thanks. Quote Link to comment Share on other sites More sharing options...
MrSkippyJ Posted July 18, 2011 Report Share Posted July 18, 2011 a mono amp that isn't 1ohm stable? Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
Louisiana Bass Posted July 18, 2011 Report Share Posted July 18, 2011 Kickers new amps are only stable down to 2 ohms Quote N8. No homo...unless you want there to be. Link to comment Share on other sites More sharing options...
MarcoCaparrotta Posted July 18, 2011 Author Report Share Posted July 18, 2011 Kickers new amps are only stable down to 2 ohms so there is no way in hell that I can run these subs on my amp? Quote Link to comment Share on other sites More sharing options...
vettedude102 Posted July 18, 2011 Report Share Posted July 18, 2011 (edited) 6 ohms wiring them in series Edited July 18, 2011 by vettedude102 Quote 2 polk audio 4x6'skenwood head-unit 220 amp Mechman alt1979 Corvette 2003 corvette z06 alpine radio and the bose system that came stock Link to comment Share on other sites More sharing options...
MrSkippyJ Posted July 18, 2011 Report Share Posted July 18, 2011 (edited) Kickers new amps are only stable down to 2 ohms LAME so there is no way in hell that I can run these subs on my amp? you can try it in parallel, it's 1.5 ohms. I don't know much about kicker amps so I have no idea what it might do. I wouldn't really recommend it if it were me though. Edited July 18, 2011 by MrSkippyJ Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
MarcoCaparrotta Posted July 18, 2011 Author Report Share Posted July 18, 2011 6 ohms if its at 6 ohms, my amp will run fine? will it still put out the full 750 watts? Quote Link to comment Share on other sites More sharing options...
RickyFriery97 Posted July 18, 2011 Report Share Posted July 18, 2011 You can wire down to 1.5 ohm, you could try, after rise you could be alright but don't count on it to save you, I've seen some zx series amps ran @ 1 ohm. Quote 2014 Chevy Silverado Crewcab 1994 Chevy Full Size blazer Link to comment Share on other sites More sharing options...
6berry Posted July 18, 2011 Report Share Posted July 18, 2011 you can wire them down to 1.5 ohms which could be safe, could cause problems. i doubt the difference between 1.5 and 2 would be a problem though Quote 1999 Audi A4 1.8T::: 4 - DC Level 3 10's in a 4th order Rockford P6002 on Subs for now (3-3.5k coming eventually) MB Quart ONX4.60 for Mids and Highs Boston S50 Components in Front Boston S65 Coaxials in Rear 40 Sq Ft of Second Skin Damplifier Build Thread UBL 1948 Plymouth Link to comment Share on other sites More sharing options...
fox_racin4 Posted July 18, 2011 Report Share Posted July 18, 2011 I say try 1.5... it should be fine Quote 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.