hrtbrk1 Posted July 23, 2011 Report Posted July 23, 2011 SA 8's dont like sealed enclosures nore will they get as loud as I want them to be in a sealed box can anyone answer my questions about the aeroports? and why should they be external? just so they dont take up air space in the box? who says they dont like sealed boxes??? but aeroports dont need to be as long, and external to not take up net space and it looks cooler than an external slot port..plus less port noise Quote
lifted stepside Posted July 23, 2011 Author Report Posted July 23, 2011 (edited) Sean over at sundown only. recommends them to be ported and for an external aero. I just mount the one flared end inside the box then the rest just obviously outside the box. Edited July 23, 2011 by lifted stepside Quote
Reilly Posted July 23, 2011 Report Posted July 23, 2011 Single 12" DD needs to see 2.2-2.75 cubes to be happy, plus port if you like low and efficient. Quote Clovis Custom Audio 559-392-3600 96 Silverado Single Cab 2-DD9515's Cut-through 1-DDSE Amp Stock electrical and a couple small stingers, LOL
lowpt Posted July 23, 2011 Report Posted July 23, 2011 2 SA-8s on a quality 1.2k amplifier in a good box should surprise the hell out of them Just sayin lol. DC in your name and avatar and giving props to Sundown!! Quote
Supercharged DCs Posted July 23, 2011 Report Posted July 23, 2011 2 SA-8s on a quality 1.2k amplifier in a good box should surprise the hell out of them Just sayin lol. DC in your name and avatar and giving props to Sundown!! I try to not be a DC nuthugger, there's enough of them around already lol. Lifted, you can mount the flare inside or outside. Quote Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
lifted stepside Posted July 27, 2011 Author Report Posted July 27, 2011 So I'm deff. doing 2 sa8s built the box today shes right at 1.3 cubes after diplacement was wondering if I have enough room to put the port(aero) inside the box so I dont have this god awful pipe in the way killing the look Quote
Supercharged DCs Posted July 27, 2011 Report Posted July 27, 2011 Is the box 1.3cubes after port displacement, or did you design the enclosure to have an external port? Also, I may have missed it but how big is the aeroport, and how long? Quote Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
lifted stepside Posted July 27, 2011 Author Report Posted July 27, 2011 its 1.3 before displacement I did this by accident but now I'm trying to compensate and make it 1.2 cubes by putting the port inside. if that makes sense? and I'm on the fence on how big to make the port both length an size of pipe? I'm not sure what to tune the box to and wondering if a 3in aero would be ok? most i see people run 4-6in? I'm waiting from a message back from sean over at sundown only to know what to tune it to and how much port area I need? unless you know^? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.