awall1022 Posted August 14, 2011 Report Share Posted August 14, 2011 (edited) Sorry in advance if this is a repost of another thread but i didnt see one. Anyway i have a Fusion FJL-1211D and my controls on it are Level,Sub Sonic,LPF,Q, and Phase Shift. i know how to set all of these except my "Q" setting how do i set this and can someone explain what it is/doese thanks Edited August 14, 2011 by awall1022 Quote lifted trucks gorgeous sluts a pretty face and slammin bass My current Set up Car less I Do Ported Box designs/cutsheets with 3d google sketchup model just PM i would really want an in-depth guide Just flip the fucking thing over Link to comment Share on other sites More sharing options...
Skullz Posted August 14, 2011 Report Share Posted August 14, 2011 If i'm not mistaken it's a bass boost around 45hz or so, it's just a guess but i know ppi had used qbass on the older power class amps that boosted bass. Quote 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2 Link to comment Share on other sites More sharing options...
awall1022 Posted August 14, 2011 Author Report Share Posted August 14, 2011 so if i just turn it all the way down i should be fine? Quote lifted trucks gorgeous sluts a pretty face and slammin bass My current Set up Car less I Do Ported Box designs/cutsheets with 3d google sketchup model just PM i would really want an in-depth guide Just flip the fucking thing over Link to comment Share on other sites More sharing options...
kickass audio Posted August 14, 2011 Report Share Posted August 14, 2011 Skullz is correct. Fusion is big on the 45Hz bass boost. Thats all the "q" knob is for is a boost in the 45Hz frequency area. You want to have this set as low as possible. If you had a tool like an oscope or the smd dd-1 you could set it a little bit to see how high you can turn it up before it clips/distorts but for now just leave it all the way down. Quote 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
awall1022 Posted August 14, 2011 Author Report Share Posted August 14, 2011 awesome thanks so it looks like 2 of the 5 controls on my amp are not even gonna be touched (phase shift and "Q") thanks guys for the help watch for my build coming soon Quote lifted trucks gorgeous sluts a pretty face and slammin bass My current Set up Car less I Do Ported Box designs/cutsheets with 3d google sketchup model just PM i would really want an in-depth guide Just flip the fucking thing over Link to comment Share on other sites More sharing options...
kickass audio Posted August 14, 2011 Report Share Posted August 14, 2011 sweet we all like builds. lol. i was just too lazy to stop and take pics and vids of mine when i was putting it all together. Quote 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
awall1022 Posted August 14, 2011 Author Report Share Posted August 14, 2011 This will be my first build so i will be documenting it thoroughly haha Quote lifted trucks gorgeous sluts a pretty face and slammin bass My current Set up Car less I Do Ported Box designs/cutsheets with 3d google sketchup model just PM i would really want an in-depth guide Just flip the fucking thing over Link to comment Share on other sites More sharing options...
kickass audio Posted August 14, 2011 Report Share Posted August 14, 2011 mine was too for being a build i made from the ground up. I made the same promise but broke it when i realized how much time i would waste to stop and take pics for each thing i was doing. Quote 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
awall1022 Posted August 14, 2011 Author Report Share Posted August 14, 2011 well i got a buddy that wants to learn how to wire amps and subs and HU's and such so ill be making him take pics while i do everything haha Quote lifted trucks gorgeous sluts a pretty face and slammin bass My current Set up Car less I Do Ported Box designs/cutsheets with 3d google sketchup model just PM i would really want an in-depth guide Just flip the fucking thing over Link to comment Share on other sites More sharing options...
kickass audio Posted August 14, 2011 Report Share Posted August 14, 2011 HAHAHA that is great. Too bad my friends are complete morons and would make me stop to teach their dumbasses how to do this stuff and they wouldnt understand it. rofl. Quote 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.