Witch is my remote wire in my car??

[MrSkippyJ]

witch=scary woman that rides a broom

which is the version fo the word you are looking for

I was just being funny, or trying anyway.

oh well i have speech problems but when i split the remote wire from the radio connected to the harness do i split both ends of that wire and tie them in with my amp remote wire?

Which is why I wasn't an ass about it

yes you need all 3 wires to connect. That wire also turns your radio on.

[bigmescan]

Take remote and memory wire and hook them to the yellow/red switch wire then hook power wire to constant if that's what u r asking.

[tctdh11]

witch one? the one on the broom!!!!

[Mr Godly]

witch=scary woman that rides a broom

which is the version fo the word you are looking for

I was just being funny, or trying anyway.

oh well i have speech problems but when i split the remote wire from the radio connected to the harness do i split both ends of that wire and tie them in with my amp remote wire?

Which is why I wasn't an ass about it

yes you need all 3 wires to connect. That wire also turns your radio on.

Ok thanks alot

[Blackedout]

Tap into the switched 12v wire. Run one run straight back to the amp. Then daisy chain the remote wire from one amp to the other. I'm not sure what you guys are getting at with 3 wires. There's only one wire that your tapping into and 2 end points that it needs to go to.

[bigmescan]

I think he was asking to hook all 3 together on one power wire. That's how I read it. But I could be wrong. That's why I explained it the way I did.

[310_cutty]

The remote wire from the H/U gets wired to the remote terminal on the amp not to the switched 12v from your car!!!!

[Katt]

The remote wire from the H/U gets wired to the remote terminal on the amp not to the switched 12v from your car!!!!

If he's using stock, Then it would be the Switched Ignition, If hes using a Aftermarket deck, then he can use the Blue Remote Wire.

If your using stock, Personally, i would put a Relay on it, That's what i did with mine, Both my amps made a pop sound when they turned on, So i did it with a relay, then it quit. Just a suggestion, Dont have too though.