mustangbuzz64 Posted August 30, 2011 Report Posted August 30, 2011 hey whats up everyone i am planing on getting 2 10 inch audio que 2.0s and i was wondering what amp to get the audio que 750 or the kenwood 1800 the kenwood is 50 dollars less and puts out 500 watts at 4 ohms and the subs are 250 rms each and both amps are monoblocks and i need help picking what one to get or could you recommend any others thanks everyone Quote
Supercharged DCs Posted August 30, 2011 Report Posted August 30, 2011 I'd personally choose the AQ750, it's fairly cheap and proven. It would also keep you with AQ I like woofers matching amps. Quote Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
slaughter Posted August 30, 2011 Report Posted August 30, 2011 AQ match your subs and their amps are good Quote SOLD 2006 Ford Ranger Single Cab2 DC XL 15's2 Crescendo BC2k's4th Order Blowthrough CURRENT 2012 Dodge Charger R/T 2 Tantric HD 12's Ampere 3800 2 XS XP 3000's
Winn Posted August 30, 2011 Report Posted August 30, 2011 (edited) i own one.. And i havent got my DD-1... so its guess with the gain.. But no matter where it is my amp stays at room temp maybe a little warm... But what amp dont get warm Overall very good amp way better than a kenwood Edited August 30, 2011 by Winn Quote You know how you avoid that? Man the fuck up and bang her best friend sister mom cousin worst enemy and never look back. JUST SAY ANTI-AUDIOPIPE
bassrace Posted August 30, 2011 Report Posted August 30, 2011 AQ 750. Nuff said.. Quote 145.9@40hz 145.3@34hz big 3 X2 group 34 Deka Group 31 All 0/1 awg jl meta wire Alpine CDA 7894 Orion HCCA D5000 2 AQ HDC312's Crunch gpv1100.2 (for 6.5"s only) AQ pro audio 6.5" - 3 sets AQ supertweeters - 2 sets 2000 Slamry
mustangbuzz64 Posted August 30, 2011 Author Report Posted August 30, 2011 ok but how do i wire them to 2 ohms because it says the amp puts out 500 at 2 ohms at 14.4v whats that Quote
kr15 Posted August 30, 2011 Report Posted August 30, 2011 AQ proven build, even tho the Kenwood is CEA compliant, its at 14.4v and likely quickly loses output below that voltage and that rating was likely at an unacceptable thd, CEA doesnt take that into account Quote Team Flex Issues Low tuning > God 2011 CALI AS1 STATE CHAMP
Guest Posted August 30, 2011 Report Posted August 30, 2011 ok but how do i wire them to 2 ohms because it says the amp puts out 500 at 2 ohms at 14.4v whats that you cannot with 2 dual 4 ohm voice coil woofers. you can only wire them to 1 or 4 ohms. Quote
Winn Posted August 30, 2011 Report Posted August 30, 2011 (edited) ok but how do i wire them to 2 ohms because it says the amp puts out 500 at 2 ohms at 14.4v whats that Tell me what you are running first.... Subs wise Wire them to 1 ohm and give them bitches some power...... Wait dont... Unless you have tuned gains and dont distort at all. and know a little bit Edited August 30, 2011 by Winn Quote You know how you avoid that? Man the fuck up and bang her best friend sister mom cousin worst enemy and never look back. JUST SAY ANTI-AUDIOPIPE
mustangbuzz64 Posted August 30, 2011 Author Report Posted August 30, 2011 i dont no what that means so it wont put out 500 watts Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.