Jump to content

oppinions on this 3-way speaker set


Recommended Posts

and the map pocket panel is a separate part so cant really mod anything on both cuz you have to take bottom panel off to get to screws for other door :-(

and no leg room for speaker in kick panel

Edited by michigancapri92
Link to comment
Share on other sites

might just stick to my 8inch dayton dvc 8inch speakers for the rear, or do you guys have a good roccomended 6.5 component set that is very high power wattage ? wana have a very clear front stage

Link to comment
Share on other sites

might just stick to my 8inch dayton dvc 8inch speakers for the rear, or do you guys have a good roccomended 6.5 component set that is very high power wattage ? wana have a very clear front stage

There is no correlation between clarity and power handling. Actually, there isn't a correlation between anything and power handling as there is no enforcement of an industry standard when it comes to those numbers. For instance; 10w of bass sent to a tweeter will smoke it despite it being rated at 100w (or whatever). In that instance, power handling didn't mean anything.

If you want loud & clear; go to a local shop and listen to some for yourself. Your ears & preferences are different than everyone else on this board. From there, how you set the high-pass crossover and how much you abuse your system will have more of an affect on the longevity of those components than what's printed on the box.

RMS ratings are marketing tools used to fool people. Is a 200w speaker louder, cleaner, tougher, and overall better than a 100w speaker? No. Unless you know how each manufacturer tested their product and unless they all used the same method to reach their RMS ratings, you're really comparing apples & oranges.

Link to comment
Share on other sites

If your rear fill is too much louder than your front stage its going to kill the effect. If its set up right it can help widen your front stage but its not necessary. Best thing is to keep it simple with just the front stage.

98 Chevy Blazer 4 Door

Stock Everything

The New Setup

1 - Pioneer AVH-P5200DVD

1- Pioneer DEH-80PRS

2 - Blues Audio 5.25 Mids ( On the dash )

2 - Blues Audio BL8.0C Components ( In the front doors )

2 - Blues Audio BL8.0 Woofers ( In the rear doors )

1 - Linear Power 952 ( Dash )

1 - Linear Power 2202IQ Modified ( Components )

1 - Linear Power 3002 ( Rear Doors )

1 - SoundStream XBP-10 Processor

1 - SoundStream BX-20Z

2 - SoundStream DTR1.3400D

4 - RE Audio SX12D4

241543L22m9xYv.gif

Link to comment
Share on other sites

If you set your front stage up properly, you won't notice that there is no rear fill to it at all.

Need Test Tones/Sine Waves? Click Here!

My Saab 9000 build
1993 Saab 9000 Aero 5spd
Pioneer - Zapco - Hifonics - Sundown Audio - O2 Audio - RE Audio

Just Say No To Rear Speakers
Just Say No To CCA Wire
Real Men Drive Stick

Hit me up on Facebook, if you want

Link to comment
Share on other sites

If you set your front stage up properly, you won't notice that there is no rear fill to it at all.

X2

98 Chevy Blazer 4 Door

Stock Everything

The New Setup

1 - Pioneer AVH-P5200DVD

1- Pioneer DEH-80PRS

2 - Blues Audio 5.25 Mids ( On the dash )

2 - Blues Audio BL8.0C Components ( In the front doors )

2 - Blues Audio BL8.0 Woofers ( In the rear doors )

1 - Linear Power 952 ( Dash )

1 - Linear Power 2202IQ Modified ( Components )

1 - Linear Power 3002 ( Rear Doors )

1 - SoundStream XBP-10 Processor

1 - SoundStream BX-20Z

2 - SoundStream DTR1.3400D

4 - RE Audio SX12D4

241543L22m9xYv.gif

Link to comment
Share on other sites

thats what io have planned on doing ... its looking like when i finally get to it i will be doing http://www.amazon.com/Brand-Cadence-Cwm6kit-Component-Speaker/dp/B0053A3UF4/ref=sr_1_1?ie=UTF8&qid=1315175979&sr=8-1 in the front doors and then http://www.audiosavings.com/products/5.25-Inch-Car-Speakers/CADENCE-5.25-150w-RMS-2-WAY-WOVEN-SPEAKERSCROSSOVERS/US553.aspx in the kick panels for my front staged powered with a rockford fosgate t400-2

now i just need to learn or find someone who can help with making kick panels pods !

Edited by michigancapri92
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 1568 Guests (See full list)

×
×
  • Create New...