PatrickWahl Posted September 13, 2011 Author Report Share Posted September 13, 2011 (edited) Bullz is some really cheap stuff. Wire is one thing that you REALLY get what you pay for. IIRC that stuff sells for the price of 4 gauge. I'd do multiple grounds with that stuff if you are using the Raptor for power. (Raptor isn't a whole lot better than Bullz, but it is better nonetheless.) the run of raptor i have is probably from 2001 or 2002, back when they actually made good stuff. its pretty big, could barely fit a twisted end of it into my buddys audioque 2200d. Edited September 13, 2011 by PatrickWahl Quote Link to comment Share on other sites More sharing options...
jeyrapboy Posted September 13, 2011 Report Share Posted September 13, 2011 look into knukonceptz wire at least, if your doing multiple runs of cheap wire, you would have been better off doin 1 run of good wire. Quote Link to comment Share on other sites More sharing options...
PatrickWahl Posted September 13, 2011 Author Report Share Posted September 13, 2011 some people are telling me to pick up a relay or battery isolator. do I really need one? i rarely see people using them... Quote Link to comment Share on other sites More sharing options...
jeyrapboy Posted September 13, 2011 Report Share Posted September 13, 2011 to be honest i have never heard of or seen one used sense i have been on this forum. Quote Link to comment Share on other sites More sharing options...
speedball1978 Posted September 13, 2011 Report Share Posted September 13, 2011 no you do not need a relay or a battery isolator, its a waste of money use the wiring diagram you have.. that will be best for you... Quote Link to comment Share on other sites More sharing options...
RXdriver11 Posted September 13, 2011 Report Share Posted September 13, 2011 x2 on better wire. Check out knukonceptz Quote Rebuild Log with the SMD CURRENT.. Honda Accord Coupe Porsche Cayenne S Lexus CT200 Lexus ES300 (sold) 99 Lexus RX 300 (sold)ADDING Honda - Hertz setup, more to come Porsche - Fi BL, XS Power, more to comecoming soon..peep the old rebuild log of the Lexus RX Link to comment Share on other sites More sharing options...
Guest SuperRetardForce5 Posted September 13, 2011 Report Share Posted September 13, 2011 FREE TROLL ACCOUNT! User Name: SuperRetardForce5 Password 169704172 Quote Link to comment Share on other sites More sharing options...
gally Posted September 27, 2011 Report Share Posted September 27, 2011 troll again?? Quote 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X Link to comment Share on other sites More sharing options...
porksoda Posted September 30, 2011 Report Share Posted September 30, 2011 Looks good but just a quick question. Why are do you have 2 ground on the back battery? Quote My truck build: http://www.stevemeadedesigns.com/board/topic/111744-1998-dodge-dakota-build/page__pid__1565536#entry1565536 AlphaDamp CLD Mats - Get more sound deadening using less sound deadener Link to comment Share on other sites More sharing options...
BassMunky Posted October 2, 2011 Report Share Posted October 2, 2011 (edited) soo you need a fuse before the the first battery and one after it? and the 2 battery? soo a total of 3 fuses? that a lot Edited October 2, 2011 by BassMunky Quote Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.