triplec19 Posted October 1, 2011 Report Posted October 1, 2011 (edited) Just installed an AQ2200D and a 15 inch DC XL. Running it at 1 ohm I have pictures on the install and the settings on the amp. Electrical is pretty bulletproof 200amp alt, 2 XS 1200 batt's, 0 gauge everywhere including big 3. Doesnt drop below 13.8 volts. The clip light goes on pretty often, on the remote but sometimes the remote wont turn on and sometimes the power led doesnt work. Usually when it "hits" hard or theres a long bass note it stays lit. I dont hear any distortion i feel like the gain is where it should be its at about 2v and my deck has a 2v output. Do u guys think it looks right? BTW, use the top of the notch to indicate where the gain and subsonic and lpf are. The boost is at zero. Edited October 1, 2011 by triplec19 Quote
deeje Posted October 1, 2011 Report Posted October 1, 2011 Use a dd1 your probably clipping Quote --2004 Toyota 4runner New Build Log -2002 Acura Tl-S Old Build Log Team DC Audio spl dust is an option you can get on the coils... it's great for extra 1000 watts of power where can i get this spl dust and how much is it. is it hard to apply? lol
stavo Posted October 1, 2011 Report Posted October 1, 2011 when u ran ur remote wire did u make sure it was free from moving parts or sharp objects? check and see u might have a short in ur remote wire . just a thought . Quote
triplec19 Posted October 1, 2011 Author Report Posted October 1, 2011 What is a DD1? and the wire isnt even run yet just plugged it in. Quote
n8ball2013 Posted October 1, 2011 Report Posted October 1, 2011 Are you sure you're not running it at almost full tilt? Aquatic has backwards gain pots Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
deeje Posted October 1, 2011 Report Posted October 1, 2011 A gain setter. Look on the site. Quote --2004 Toyota 4runner New Build Log -2002 Acura Tl-S Old Build Log Team DC Audio spl dust is an option you can get on the coils... it's great for extra 1000 watts of power where can i get this spl dust and how much is it. is it hard to apply? lol
triplec19 Posted October 1, 2011 Author Report Posted October 1, 2011 head unit is at about 75% and i turned the gain up from zero from the box to what i think is about 2v Quote
Mario928 Posted October 1, 2011 Report Posted October 1, 2011 What is a DD1? and the wire isnt even run yet just plugged it in. This is a dd1. It is use to set your gain properly. http://wccaraudio.com/smd-distortion-detector-dd-1.html Quote Build Under Construction Head Unit = Kenwood DDX514 Amps = Kicker 750.1, Going to install Sundown 1500D v3 and Sundown 125.4 Battery = XS D3400 Wires = Kicker RCA's, 0 Gauge street wire and Stinger Mids and Highs = Stock Sub= Kicker L7 12" Alternator = 220 Mechman Sound Deadner= Fatmat and Stinger Road Kill
__d_a_v_i_d__ Posted October 1, 2011 Report Posted October 1, 2011 You cannot hear distortion ! so u cant say that ! nice set up tho. Quote Chevy Impala Shocker Sigs / TC Sounds 12s Sundown NS-1 | SAX 100.4 Sundown Neos | Dayton Audio Neos ETCCC ETCCC ETCCC My YouTube ---- Subcribe!!
triplec19 Posted October 1, 2011 Author Report Posted October 1, 2011 damnnn 140 bucks for a one time test prob, n 3 week shipping. I have access to a really nice fluke voltmeter. We have oscilloscopes at school should i try and borrow one of those from the lab or go to a shop first n see if they can test it somehow? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.