Hobbs155 Posted October 20, 2011 Report Posted October 20, 2011 I'm looking at running 2 x 12" Rockford T2's and 1 x 15" Rockford T2 Has any one tried this or can provide advice on this? I dont want to spend my money on the three subs if its going to waste my time, I would most likley run them all of one amp. HU: Alpine CDA-9886 with Imprint Module Fronts: Alpine SPR-60C Rears: Alpine SPR-60 Amps: Alpine PDX4.150 and ICE Power 20000D Subs: 1 x 15" Rockford T2D215 Big 3 Upgrade 0/1 AWG 2 Farad Cap Wiring 2 AWG 120Amp ALT
Maxim Posted October 20, 2011 Report Posted October 20, 2011 Don't mix subs. Ruins sound quality. You're better off choosing either the 2 12's or the single 15 and going from there. What coils would they be? Are you re-using the ICE amp in your sig or getting a new amp? wtf is lolcats? I'd def get a fat hooker if i had to resort to that kinda thing. I feel like they'd be grateful and work harder. Also its more bang for my buck, more real estate for my dollar if you catch my drift. its like the Costco of streetwalkers. I was hoping for 150 . I was hoping she would let me put it in her butt
adam6604 Posted October 20, 2011 Report Posted October 20, 2011 my guess is cancellation issues Driving my 2008 Dodge Ram 2500 MEGA cab with the 5.7 hemi. Audio: Two 10" Alpine Type R's ( 1000rms models ) Hifonics BRZ 2400.1D @ .5 ohm Two Kinetic 1400 batteries ( soon to have XS power under hood ) Tsunami 1/0 Awg wire throughout truck. Stock Infinity 7 speaker system ( Junk ) soon to be replaced, probably all Alpine. Exterior: 17"Dick cepek rims with 33" Toyo MT tires Bushwacker fender flares Magnaflow true duel exhaust LED tail lights with Projector headlights Plasti-dip fun coming soon!
Supercharged DCs Posted October 20, 2011 Report Posted October 20, 2011 Is there any reason you want to do this? Its not normally recommend to mix subwoofer sizes, but I know Techforce does it with good results, though he has each size (15 & 18) in a different enclosure off of different amplifiers. Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
MrSkippyJ Posted October 20, 2011 Report Posted October 20, 2011 and he also has each sub size playin different frequencies. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
Hobbs155 Posted October 20, 2011 Author Report Posted October 20, 2011 I was going to get given the 15" and i'v already ordered the 12's so would just have the 15 sitting around or the 12's I would prob just use my ICE power amp, it should be more the capable if i feed it enough power. HU: Alpine CDA-9886 with Imprint Module Fronts: Alpine SPR-60C Rears: Alpine SPR-60 Amps: Alpine PDX4.150 and ICE Power 20000D Subs: 1 x 15" Rockford T2D215 Big 3 Upgrade 0/1 AWG 2 Farad Cap Wiring 2 AWG 120Amp ALT
Hobbs155 Posted October 20, 2011 Author Report Posted October 20, 2011 I just seen this thread about mixing sub sizes, it seems there is a lot of people against it so probably not the best idea. http://www.stevemeadedesigns.com/board/topic/3938-mixing-subwoofers/ Might just try it out any way and then post what the out come is, i still got to wait another week for the 12's to arrive. HU: Alpine CDA-9886 with Imprint Module Fronts: Alpine SPR-60C Rears: Alpine SPR-60 Amps: Alpine PDX4.150 and ICE Power 20000D Subs: 1 x 15" Rockford T2D215 Big 3 Upgrade 0/1 AWG 2 Farad Cap Wiring 2 AWG 120Amp ALT
cjvue Posted October 20, 2011 Report Posted October 20, 2011 I wouldnt personally mix different size subs, but if you're up for it... Be sure to report back because i'm interest to know. My Build Log- T E A M S U N D O W N A U D I O - 2013 DbDrag WF SS1-2 - 5th Place 154.6db 2013 MECA Mod3 CA State Final Champ 153.4db Powered by: Sundown Audio
Recommended Posts
Archived
This topic is now archived and is closed to further replies.