Box help please... Dc18 lvl5

[Angel187]

I have a soundigital 16k, with enough electrical to back it, I will be running one dc lvl5 18 in a ss n/w box in a vw golf. Since I have never played with the lvl5 before what would be recommended for box size and port with the power I have.

Subs are dual 1ohm, .5 burp

[CortezDTV]

at the 16k at .5

I played with a lvl 5 on an 8k, they get super loud, I would watch ur clippin to that poor sub...

Might want to add extra spiders too

But 5 cubic feet, 16 to 19 port area

[CortezDTV]

Double post.....

Edited December 6, 2011 by CortezDTV

[fmedina]

dam ya 16k for one lvl5? thats quite a bit. shoot cortez's two 15's lvl5 on a single 5k is fuckin loud. one lvl5 might not hold long on 16k at .5

[CJ18]

Very small box and I don think the SD16k likes being run much lower than .7

[fecupe2001]

If it´s a burp machine (wich he said it is) it could take it

[fmedina]

oh burp maybe ya. but like cj said. youd want a pretty small box.

[Angel187]

oh burp maybe ya. but like cj said. youd want a pretty small box.

Im thining an L box,5 cu/ft after displacement with a 10" port 34 inches long. This was after a conservation with rusty as per needed sq/ft.

This is not a sq or ground pounder, nothing but numbers here.

Also thinking maybe the traditional n/w box, sq port and sub forward to the b piller. Oppions as i am undecided.

[Whothennow]

Gutted from Bpillar back and window line down. Box in the back sear area as bog as you can get. Biggest port you can fit then shrink it till it peaks. Done. [email protected] is fine for burps. They want to see 1-1.5 after rise.