skyhighcaraudio Posted June 13, 2012 Author Report Posted June 13, 2012 Im curious how park and pound will work with you up that high, it will push u farther away from the mic wont it, both up and horizontally? Either way I like the 20" lift! Gonna be badass Nice meeting u guys at the show saterday i have no idea how that will work out haha MAN!! You could alter a fiberglass ladder, 4', 6' whatever works, and it could swing down from under the truck on actuators. Then when you don't need it, swing up and be out of the way under the truck! Either way, I wanna see this thing when it's done! I wish I had the money to do this to my F350, but alas....................I'm married, thus married money, thus no fun for me! I'll have to stick to my audio and 4 12's 4th order blow through. I wanna lift my 350 though for sure! Something about being higher than everyone else. i think imma wait on the lift to be on to figure those steps out lol ya im not married and no kids and no girl lol so i might as well do this when i can haha though you have a good wife if she lefts all the shit you do to your cars go on haha props to her!! should make a nice mall crawler im not sure if you know how to read before you talk but like i said before this truck will still hit any and all mud puddles and go off road and pull trailers so if you dont like my truck or lift you can take your comments elsewhere. Rig up a rope ladder to fall out the passenger door when it opens. haha that may have to happen before i can figure the motorized steps out lol that would be some funny shit. Contact us for the best quality cables and accessories with the fastest shipping in the industry EMAIL: [email protected]<script data-cfhash='f9e31' type="text/javascript"> /* */</script> LIKE US ON FB: https://www.facebook.com/SkyHighCarAudio ADD ME ON FB: https://www.facebook.com/jon.rabe.1 MONSTER SKY HIGH/DC GMC: http://www.stevemeadedesigns.com/board/topic/127057-sky-high-monster-gmc-walk-through-12-lvl-5-15s-6-9ks-trim-panels-and-wiring-p-90/
skyhighcaraudio Posted June 13, 2012 Author Report Posted June 13, 2012 what kit are you using for your brackets?offroad direct, offroad unlimited,offroad design, should give you 3-4" of lift, sky manufacturing will give you 6" just from the brackets. so far thursday looks like i should be home by 3, i'm also down to do a little wrenching. heres the kit: http://www.offroaddi...-kit-_p_10.html shit shoot me a text i will more than likely be at dc ill be doing it out in silver springs at a buddies shop where they have all the tools lol i could more than likely use some help though and ill pay your gas and shit to come out and over see haha i have the same kit, it gave mine 3",and i have 8" skyjacker softrides leafs up front and a 10" spring pack out back with a 1" block. the only thing i dont like about the ord kit is the shock hoops.i dont like the the way they mount. i ended up using the hoops off my 10" whiplash kit.they actually mount to the frame instead of the upper control arm mounts. shit! silver springs, i can always have my wife drive my truck to work and take her 04 sierra out there. i'll hit you up thursday when i'm on my way home. fuck now you make me think about how much lift it will give me cause the diff from 5 to 3" is kinda big and could make some serious tire rub issues come into play. i wonder if they are just diff cause of the years our trucks are? imma have to look into that. shit man the more help the better haha if youre down im down as fuck. i got a few friends that have a decent amount of fab and lift experience coming out so hopefully itll work out. then itll get trailered to reno to get the drivelines made since idk how long they will need to be in advance...unless you have some way of figuring that out lol Contact us for the best quality cables and accessories with the fastest shipping in the industry EMAIL: [email protected]<script data-cfhash='f9e31' type="text/javascript"> /* */</script> LIKE US ON FB: https://www.facebook.com/SkyHighCarAudio ADD ME ON FB: https://www.facebook.com/jon.rabe.1 MONSTER SKY HIGH/DC GMC: http://www.stevemeadedesigns.com/board/topic/127057-sky-high-monster-gmc-walk-through-12-lvl-5-15s-6-9ks-trim-panels-and-wiring-p-90/
scooter99 Posted June 13, 2012 Report Posted June 13, 2012 Ya I must admit she's a keeper. Matter of fact we just had our 8 year anniversary last night. But I spend my own money on my stuff. We have her and mine money yes. Keeps a family sane! All money goes to the house for bills, then we get an allowance out of that which is equal parts. But she's definitely put up with a lot of late nights and time on the computer researching etc. Great woman! Ya do it while you can! I can't wait to see this project done, or at least started. I know there's a lot involved before it gets started. DO WERK SON!!!! Facebook Page: S99Creations 2006 F250 Lariat Build
badasschevy Posted June 14, 2012 Report Posted June 14, 2012 what kit are you using for your brackets?offroad direct, offroad unlimited,offroad design, should give you 3-4" of lift, sky manufacturing will give you 6" just from the brackets. so far thursday looks like i should be home by 3, i'm also down to do a little wrenching. heres the kit: http://www.offroaddi...-kit-_p_10.html shit shoot me a text i will more than likely be at dc ill be doing it out in silver springs at a buddies shop where they have all the tools lol i could more than likely use some help though and ill pay your gas and shit to come out and over see haha i have the same kit, it gave mine 3",and i have 8" skyjacker softrides leafs up front and a 10" spring pack out back with a 1" block. the only thing i dont like about the ord kit is the shock hoops.i dont like the the way they mount. i ended up using the hoops off my 10" whiplash kit.they actually mount to the frame instead of the upper control arm mounts. shit! silver springs, i can always have my wife drive my truck to work and take her 04 sierra out there. i'll hit you up thursday when i'm on my way home. fuck now you make me think about how much lift it will give me cause the diff from 5 to 3" is kinda big and could make some serious tire rub issues come into play. i wonder if they are just diff cause of the years our trucks are? imma have to look into that. shit man the more help the better haha if youre down im down as fuck. i got a few friends that have a decent amount of fab and lift experience coming out so hopefully itll work out. then itll get trailered to reno to get the drivelines made since idk how long they will need to be in advance...unless you have some way of figuring that out lol its just the different years.i could probably stuff a 44" tire under my truck. atleast 42's with minor rubbing. as for your driveshafts go talk to kenny over at bayshore truck and equipment. http://www.bayshoretruck.com/loc3.htm he wont try and rip you off. he is very fair on his pricing. i would go down and talk to to let him know what you are doing,then trailer it over.he will measure it out, and should have them done in a couple days. center console: lvl 4 12 1.75 cu ft tuned 37htz alpine cda-9886 dc audio 120.4 infinity kappa 6.5" components
3Ltriste13 Posted June 14, 2012 Report Posted June 14, 2012 CV Drive shafts are guna be a must my truck isnt as tall as your truck is going to be and i cant use my 4wheel drive over 25 mph the vibrations are crazy YEEEEEEEEEEEEE
skyhighcaraudio Posted June 15, 2012 Author Report Posted June 15, 2012 Ya I must admit she's a keeper. Matter of fact we just had our 8 year anniversary last night. But I spend my own money on my stuff. We have her and mine money yes. Keeps a family sane! All money goes to the house for bills, then we get an allowance out of that which is equal parts. But she's definitely put up with a lot of late nights and time on the computer researching etc. Great woman! Ya do it while you can! I can't wait to see this project done, or at least started. I know there's a lot involved before it gets started. DO WERK SON!!!! haha ya man consider yourself lucky...the reason im single is because none of my previous girls wanted to deal with it lol so they got to get out lol i know man i need to get something going here...i learned a lot today from badasschevy (who was nice enough to let me look at his truck today) so i have a lot better idea of whats going on here CV Drive shafts are guna be a must my truck isnt as tall as your truck is going to be and i cant use my 4wheel drive over 25 mph the vibrations are crazy ya its a must! gonna be a serious angle to get the power to the ground. im getting them custom made by the dude who is linked above so we will have to get that taken care of Badasschevy: thanks a lot for letting me take a look today. its a lot nicer to get to look in person lol pictures only help so much! ill be in contact once i find this axle so i can get all that steering shit, i like how yours if set up and the price is nice too lol so imma need to get in contct with those people (cause i already forgot it all lol) Contact us for the best quality cables and accessories with the fastest shipping in the industry EMAIL: [email protected]<script data-cfhash='f9e31' type="text/javascript"> /* */</script> LIKE US ON FB: https://www.facebook.com/SkyHighCarAudio ADD ME ON FB: https://www.facebook.com/jon.rabe.1 MONSTER SKY HIGH/DC GMC: http://www.stevemeadedesigns.com/board/topic/127057-sky-high-monster-gmc-walk-through-12-lvl-5-15s-6-9ks-trim-panels-and-wiring-p-90/
Lbox88 Posted June 15, 2012 Report Posted June 15, 2012 So much talk, so little work. UBL | Build Log
badasschevy Posted June 16, 2012 Report Posted June 16, 2012 no problem, heres some links. cross over steering http://www.sky-manuf...duct.php?id=164 track bar http://www.sky-manuf...duct.php?id=224 just need to figure out how much lift you will be doing, before you order. not sure if you have to sign up to view this, but here is 17" of lift with 44's. alot of his pics have been deleted.but some are still there. http://www.fullsizechevy.com/forum/general-discussion/projects-builds-restorations/383899-2-sases-1-garage-summer-2009-a.html?highlight=solid+axle+swap center console: lvl 4 12 1.75 cu ft tuned 37htz alpine cda-9886 dc audio 120.4 infinity kappa 6.5" components
skyhighcaraudio Posted June 16, 2012 Author Report Posted June 16, 2012 So much talk, so little work. haha do you know the price tag for this? no problem, heres some links. cross over steering http://www.sky-manuf...duct.php?id=164 track bar http://www.sky-manuf...duct.php?id=224 just need to figure out how much lift you will be doing, before you order. not sure if you have to sign up to view this, but here is 17" of lift with 44's. alot of his pics have been deleted.but some are still there. http://www.fullsizec...solid+axle+swap you the man!!!!!! i have my eyes on an axle (in indiana i have some friends out there) so once thats on its way imma get to ordering the rest Contact us for the best quality cables and accessories with the fastest shipping in the industry EMAIL: [email protected]<script data-cfhash='f9e31' type="text/javascript"> /* */</script> LIKE US ON FB: https://www.facebook.com/SkyHighCarAudio ADD ME ON FB: https://www.facebook.com/jon.rabe.1 MONSTER SKY HIGH/DC GMC: http://www.stevemeadedesigns.com/board/topic/127057-sky-high-monster-gmc-walk-through-12-lvl-5-15s-6-9ks-trim-panels-and-wiring-p-90/
kryptonite Posted June 18, 2012 Report Posted June 18, 2012 Thus thing better be operational when i am out there in august, i need a demo or 10 lol. U dont want rusty having all the fun do u? DC SOUND LAB NUT HUGGERCurrently Own 4 - 18" lvl 6s (m3) w/full Carbon Fiber option 2 - DC 5k lvl 4 motor lvl 2 motor On 8/2/2013 at 8:13 PM, n8ball2013 said: this is much worse. Its old n8 without the time or patience to hold fucking hands. I'm supposed to be doing school work but yet here i am making sure jr fuck fuck isn't trying to poke the other kids with a stick.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.