quarterback8793 Posted December 21, 2011 Report Share Posted December 21, 2011 hey guys i am thinking about upgrading all of my electrical. what i have right now is a fi btl 18 on a aq2200d and i have a rockford fosgate 10 farad cap on it.. the wire that i am running is 0 gauge rockford fosgate wire.. i am wondering what i all have to do in order to run my amp at .5 ohms such as battery upgrades i am gunna take out the cap... i am getting a mechman alternator 270 amp.. and what else needs to be done Link to comment Share on other sites More sharing options...
Team808 Posted December 21, 2011 Report Share Posted December 21, 2011 hey guys i am thinking about upgrading all of my electrical. what i have right now is a fi btl 18 on a aq2200d and i have a rockford fosgate 10 farad cap on it.. the wire that i am running is 0 gauge rockford fosgate wire.. i am wondering what i all have to do in order to run my amp at .5 ohms such as battery upgrades i am gunna take out the cap... i am getting a mechman alternator 270 amp.. and what else needs to be done You could get away with 1 good battery under the hood. But also adding another in the rear wouldnt hurt. Member of Team 808 Member of Team North East Spl Link to comment Share on other sites More sharing options...
DTS909 Posted December 21, 2011 Report Share Posted December 21, 2011 Big 3. VM-1 Pioneer DEH-80PRS Hertz HSK 165XL Arc Audio KS 300.2 Linear Power 1002 Full Mods Fi Audio Q 10s Sundown Audio Scv 3000 Big 3 XS Power D5100 Juice Box 20AH Singer Alternator Sky High Wire <p>My Ebay feedback. http://feedback.ebay...tab=AllFeedback Link to comment Share on other sites More sharing options...
quarterback8793 Posted December 21, 2011 Author Report Share Posted December 21, 2011 like what type of battery would do the job if i just wanted one.. and i have the big three done it is just with kinda crappy wire Link to comment Share on other sites More sharing options...
SlamminBeats Posted December 21, 2011 Report Share Posted December 21, 2011 xs 3400/3100 and you would be good to go for sure Link to comment Share on other sites More sharing options...
quarterback8793 Posted December 21, 2011 Author Report Share Posted December 21, 2011 and with one of the xs 3100s and a mechman alt and big three would that be enough to run at .5 ohm on my aq2200d Link to comment Share on other sites More sharing options...
fecupe2001 Posted December 21, 2011 Report Share Posted December 21, 2011 I´m running my DD m2a (similar amp) @ 0.5 ohms with a mechman 270A and a single HC2400 on front, works like a champ, you should be ok i guess, just run that alt and a kickass battery I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.