stanbro Posted January 4, 2012 Report Posted January 4, 2012 (edited) The box is for two DC XL 18's in a forester on a Skar 4.5k Edited January 5, 2012 by stanbro Quote Build v1 15" Skar VVX (custom ported box) w/1.2k Sundown ampBuild v2 18" DC XL x2 (custom ported box) w/4.5k Skar amp Build v3.3 destruction and re-construction time!
redlineaudio Posted January 4, 2012 Report Posted January 4, 2012 I would double layer the baffle...subs facing back/port to side? Looks like it should waaaang Quote '94 Ford Ranger Ext. Cab (3) DC XL 15's, check that (3) 18's this year! (2) DC 5k's (6) XS Power D1600's 158.9.......so far...... Montana DC Dealer/State Rep.
miniSPLlancer Posted January 4, 2012 Report Posted January 4, 2012 I don't have any experience with DC subs but the box looks good, you may want to brace side to side as well, wouldn't hurt, but good looking box Quote 2011 Mitsubishi OutlanderSony 712 Soundqubed HDS208 Alpine MRV-M500 Transmission line enclosure Soundqubed wiring Knu rca XS Power battery CNF terminals
bcpballer64 Posted January 4, 2012 Report Posted January 4, 2012 I think conceptually looks fine, I can't speak to what the dc subs like tho. But good first design if its your first. Quote "The strongest reason for people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government." -- (Thomas Jefferson)
stanbro Posted January 4, 2012 Author Report Posted January 4, 2012 Subs up port back I would double layer the baffle...subs facing back/port to side? Looks like it should waaaang Quote Build v1 15" Skar VVX (custom ported box) w/1.2k Sundown ampBuild v2 18" DC XL x2 (custom ported box) w/4.5k Skar amp Build v3.3 destruction and re-construction time!
stanbro Posted January 4, 2012 Author Report Posted January 4, 2012 not the first I've built but first I've tried to due up on my own from scratch I think conceptually looks fine, I can't speak to what the dc subs like tho. But good first design if its your first. Quote Build v1 15" Skar VVX (custom ported box) w/1.2k Sundown ampBuild v2 18" DC XL x2 (custom ported box) w/4.5k Skar amp Build v3.3 destruction and re-construction time!
kbsmoker Posted January 4, 2012 Report Posted January 4, 2012 Double up the baffle and might need bracing in the port also. Looks good tho Quote www.dcsoundlab.comyoutube video's kbsmoker2011 MECAOH AS3 Champ 147.5OH DB2 Champ 125.9WF AS3 3rd 147.3WF DB3 2nd 128.3 SystemPioneer AVH-P4300DVD2 sets Fusion Encounter 6.5 componentson Crunch Ground Pounder 1200.418" DC NEO on DC 5.0KKnukonceptz 1/0 through outBig 3 all 1/0XS D6500under hood D3100 in the backMechman 270....rebuilt by Ohio Generator
pa-pa-platypus Posted January 4, 2012 Report Posted January 4, 2012 unless im looking at this wrong..the port is 28 long on the side that is 31 long correct? if so id make so the end of the port is the width of the port away from the back of the box...if that makes sense Quote This isn't teeball. YOU DO NOT GET A TROPHY JUST BECAUSE YOU SHOW UP. Put the work in and then maybe get the respect when it has been earned 151.6 with single 12 at 41 hz 153.2 with 2 12's at 43 hz power: dd m4
stanbro Posted January 5, 2012 Author Report Posted January 5, 2012 you looking at width.. the port runs length wise.. gap is 4.5" so lost an inch. I was trying to keep the area directly bellow the woofers a consistent flat surface. no sure if it really matters though unless im looking at this wrong..the port is 28 long on the side that is 31 long correct? if so id make so the end of the port is the width of the port away from the back of the box...if that makes sense Quote Build v1 15" Skar VVX (custom ported box) w/1.2k Sundown ampBuild v2 18" DC XL x2 (custom ported box) w/4.5k Skar amp Build v3.3 destruction and re-construction time!
Miguels Posted January 5, 2012 Report Posted January 5, 2012 you looking at width.. the port runs length wise.. gap is 4.5" so lost an inch. I was trying to keep the area directly bellow the woofers a consistent flat surface. no sure if it really matters though unless im looking at this wrong..the port is 28 long on the side that is 31 long correct? if so id make so the end of the port is the width of the port away from the back of the box...if that makes sense level the subs and that would help to keep a consistant flat plus you get to havr the port at back Quote my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.