graham0599 Posted January 11, 2012 Report Share Posted January 11, 2012 Are the subs 2 or 4 ohm? My 350z build- http://www.stevemeadedesigns.com/board/topic/174424-2008-350z-build/page-2?hl=%2B350z+%2Bbuild#entry2605678 Link to comment Share on other sites More sharing options...
swheeler.92 Posted January 11, 2012 Author Report Share Posted January 11, 2012 I've heard four of these the tens on a sundown 1500 and it did 153 db. Granted it was a crx still pretty loud well my car is a 2000 honda accord coupe...it lets a lot of sound from the trunk into the cabin but not a lot of road noice makes it in Link to comment Share on other sites More sharing options...
swheeler.92 Posted January 11, 2012 Author Report Share Posted January 11, 2012 Are the subs 2 or 4 ohm? i'm gonna get 4 ohm so that the final ohm load to the amp is around 1.6 Link to comment Share on other sites More sharing options...
99fullsizechevy Posted January 11, 2012 Report Share Posted January 11, 2012 Sounds like a plan, wouldn't it be 1.3 final load? And an aq1200d would work perfect Laying frame soon.. System has to wait Link to comment Share on other sites More sharing options...
swheeler.92 Posted January 11, 2012 Author Report Share Posted January 11, 2012 Sounds like a plan, wouldn't it be 1.3 final load? And an aq1200d would work perfect it might be. like i said, i'm new to a lot of the stereo stuff. Link to comment Share on other sites More sharing options...
Lbox88 Posted January 11, 2012 Report Share Posted January 11, 2012 If they're single 4's, then the final load would be 1.3 ohms. I believe the Re on those subs though is 2.9 ohms per coil, so you will be sitting right at about 1 ohm at rest. UBL | Build Log Link to comment Share on other sites More sharing options...
graham0599 Posted January 12, 2012 Report Share Posted January 12, 2012 Ya i'd look into any of the good amps. Sundown, dc, audioque, anything that does 1200-1500 rms at 1 ohm My 350z build- http://www.stevemeadedesigns.com/board/topic/174424-2008-350z-build/page-2?hl=%2B350z+%2Bbuild#entry2605678 Link to comment Share on other sites More sharing options...
Shane Fallis Posted March 7, 2012 Report Share Posted March 7, 2012 Hey, prolly off topic, but can someone help me with the specs on FI X 10" subwoofers... Its impossible to find anything on em. Like... -What's the RMS? -Can it run at 1 OHM? -Should they be ran at 2OHM? Please help me, ive been searching so much- my fingers are tired.lol Link to comment Share on other sites More sharing options...
SilveradoGoesBang Posted March 7, 2012 Report Share Posted March 7, 2012 Their rms is 400 I believe and if your talking about the subs 1 ohm stable their isn't a ohm rating for subs and you wont be able to get a 1,2,4 ohm load so you best bet is to wire to 1.3 ohms and go with a 1.2k-1.5k 1 ohm stable amp. "SilveradoGoesBang" http://www.stevemeadedesigns.com/board/topic/155256-silveradogoesbang-box-done-take-notes-on-bracing/ 2 FI BTL 18's CT Sounds 7k 2013 MidwestSPL Finals Xtreme 3 - 1st Place Link to comment Share on other sites More sharing options...
Shane Fallis Posted March 7, 2012 Report Share Posted March 7, 2012 thanks. I have a Power Acoustik BAMF-2000/1D and its is 1OHM stable. Also i was wondering.... I have 2 Earthquake 10" @300RMS, and 2 Fi X's at what is guess is -400RMS-(??), do u think that i could run all of these subs at 300 RMS, and would it sound good? Or should i just run the 2 Fi X's @ -400RMS-(??)Ive been told the Fi's are 300,400, and 500RMS so IDK) Thanks again. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.