Sid420 Posted January 23, 2012 Author Report Posted January 23, 2012 No. I am going to soon. I just need to find what I want to do with the box. I was going to do a wall but my dad said no. Quote
LoudBimmer Posted January 23, 2012 Report Posted January 23, 2012 so your back seats do not fold down? Quote
Sid420 Posted January 23, 2012 Author Report Posted January 23, 2012 Yeah. They do. Kinda. Lol. I took apart the back seat do it does. Quote
OrionStang Posted January 23, 2012 Report Posted January 23, 2012 Just do a pair of 12's. Quote SMD Super Seller My Feedback Thread
LoudBimmer Posted January 23, 2012 Report Posted January 23, 2012 Just do a pair of 12's. if he can fit 3 12's, he might as well do that. But 2 12" lvl 5's on dc 12k would be nice try 3 12" skar's with sundown saz3000 with port going thru rear deck. Quote
Guest Posted January 23, 2012 Report Posted January 23, 2012 Apparently you didnt do it in the right car then. Cause it works extremely well in open backed cars, such as SUVs. I did it in my SUV and it hits pretty hard. Its the the best set up for a trunk P.S. my sig is my old box what? SUV's and trunks are two COMPLETELY different environments. best/easiest setup for a trunk is usually port back sub back. unless you want to take the time to seal everything off, then you would do port forward sub forward. gets louder. Quote
STEvil Posted January 23, 2012 Report Posted January 23, 2012 Can you seal it off with subs up port forward? Save yourself the time and do not do subs up....it is the worst...i went that route first and then found out both forward or backward sounded way better, Design like a v-shaped box facing forward or backward.... Apparently you didnt do it in the right car then. Cause it works extremely well in open backed cars, such as SUVs. I did it in my SUV and it hits pretty hard. Its the the best set up for a trunk P.S. my sig is my old box He has a trunk car, not an open-back car. Subs back port back is best in them unless you seal it, which he could probably do if he made a v-shaped forward facing box. Quote MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed.
fecupe2001 Posted January 24, 2012 Report Posted January 24, 2012 subs side/port back is a great option if you go that route, but i have to agree with just going with 2 12´s on a kick ass box Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/
Sid420 Posted January 24, 2012 Author Report Posted January 24, 2012 How do I make a kick ass box? Lol Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.