nosho47 Posted January 25, 2012 Report Posted January 25, 2012 I have finally started on building my wall for my bodydropped s10 and all I I can get is exactly 6 cu. That is with doubling up on the sides, top and bottom. My question is if it its okay to keep it at that? my area port is 13.25 and tuned at 34.72hz. I have two sundown saz-3000's to power them. I was planning on tuning it to atleast 33hz bur there is no way i would be able to get it at that without going below 6cu. lmk what you guys think. Quote
jdmferio13 Posted January 25, 2012 Report Posted January 25, 2012 (edited) I have finally started on building my wall for my bodydropped s10 and all I I can get is exactly 6 cu. That is with doubling up on the sides, top and bottom. My question is if it its okay to keep it at that? my area port is 13.25 and tuned at 34.72hz. I have two sundown saz-3000's to power them. I was planning on tuning it to atleast 33hz bur there is no way i would be able to get it at that without going below 6cu. lmk what you guys think. That should be fine my xl loved the 3 cu. ft box.Just make sure its strong I would resin the box as well. Edited January 25, 2012 by jdmferio13 Quote
bre2ts Posted January 25, 2012 Report Posted January 25, 2012 More port Quote Feedback 1 | Feedback 2 you win some, you lose some
Nikitaaa Posted January 25, 2012 Report Posted January 25, 2012 Well, the power should make up for the small box.. So you should be fine. It could use more port though. Quote 2007 M/T Honda Civic Coupe EX (4) Sundown Audio X-8's (2) Ampere Audio 3800.1's (3) Stinger SPV-44 Batteries (1) Mechman 240 3:1 Ratio 4th order sealed from the trunkTEAM NWSPLBest termlab scores to date in Honda trunk:151.7db legal (official) IASCA trunk 3 classBest termlab scores to date in my walled Subie:152.9db legal (unofficial) IASCA advanced 2 class155db outlaw
nosho47 Posted January 25, 2012 Author Report Posted January 25, 2012 the only way i would be able to have a bigger port area without going below 6cu is to just have the box single walled... Quote
CleanSierra Posted January 25, 2012 Report Posted January 25, 2012 the only way i would be able to have a bigger port area without going below 6cu is to just have the box single walled... Or have the port go external for a few inches? Quote Im not the one you want to try to troll. Just a fyi for you.
n8ball2013 Posted January 25, 2012 Report Posted January 25, 2012 gross or net Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
CleanSierra Posted January 25, 2012 Report Posted January 25, 2012 Also, is this a bodydropped regular cab, or extended cab? Is this an in cab box, or a blowthrough? Is there an awkward 'hump' space that can be utilized in gaining a little more airspace? Quote Im not the one you want to try to troll. Just a fyi for you.
nosho47 Posted January 26, 2012 Author Report Posted January 26, 2012 there is a bump that goes up 3"... my truck is a extended cab and the box is in the cab... there is no way i could make a blowthrough cause the bed is fully modified also. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.