Sundown : New 2012 Stuff

[windowtinter]

6" p-p. ummmm holy shit. I will be waiting on a 4" coil motor and these frames.

Once the frames are fully launched on all 3" coil motors we'll do 4" coils on the 10/12/15

... but no reason to stay so small on coils for the 18 for a flag-ship model

OHH boy Ill have a tahoe a box and 2-12k's more if needed ready for 4 of these beasts, yikes i can only wonder.

[sundownz]

3) Entirely new SAX / SAZ amp line... yes you read that correctly. I won't say any more yet until I get some prototypes Only the NS-1 isn't being re-vamped as it's already brand new and a separate line.

This has taken slightly longer than I hoped but I should have the first two new amps ready to test in a few weeks as the board are pretty much ready and just need the case tooling to get mounted in.

SAZ-1500D v.3

SAX-125.4

The 100.4 part is no more -- this unit is a good bit more powerful. I'll leave the rest of the details as a surprise :thumbsup:

Next up once those launch will be the SAZ-2500D v.2 and SAZ-3500D v.2 models... and finally we'll release a new SAX two channel likely in the 150-watt or so range this time around!

Once that is all done we can get cracking on the SAE amp line again.

[BeAlLsTaR13]

deffinatly taking one of those 125.4s! how will price look compared to the current 100.4 model? cant wait for that 3500 v2

[sundownz]

deffinatly taking one of those 125.4s! how will price look compared to the current 100.4 model? cant wait for that 3500 v2

It will cost more but not much different $ to watt wise -- I think the new design will be very well appreciated... and it is being designed to be stable on 16v electrical systems (eg: 18v).

[jagblazer01]

must sell 100.4 to get 125.4 lol. Also gonna probably be grabbing 3 of those new 3500Ds for the tunnel. Cant wait.

[^_^ Gem132]

Will be grabbing a SAZ 1500 v.3 for sure to run with x line woofer might also grab the 2 chan Aswell cannot wait for this

[jagblazer01]

so Jacob. I was just sitting here thinking and was wondering if you had thought about designing some sort of processor / line driver to go along with your amps. Is this a possibility down the road somewhere?

Edited April 23, 2012 by jagblazer01

[sundownz]

so Jacob. I was just sitting here thinking and was wondering if you had thought about designing some sort of processor / line driver to go along with your amps. Is this a possibility down the road somewhere?

If I did it would be a good bit down the line. I have alot of sub / amp / mid / tweeter projects first.

[RickyFriery97]

How long out are the 125.4? will they have the same crossovers as the 100.4?s

i was about to hop on a 100.4 but i guess i need to wait