Relyks Posted January 28, 2012 Report Share Posted January 28, 2012 2-AudioQue SD 2.5 12" Subs on 1200.1D 600watts rms 1200 peak at 1 ohm in 5 cu.ft ported at 36hz roughly port all the way on the left side port and subs fired to the rear subs sharing air. Quote --> My Toyota Build Link / AudioQue Build . <-- Latest Update 1/16/12 Link to comment Share on other sites More sharing options...
CaPRiCEx383 Posted January 28, 2012 Report Share Posted January 28, 2012 (edited) Need more port, Common port should be 3, Try to shrink it down a little too, Somewhere around 4 to 4.5ft would work well. Edited January 28, 2012 by CaPRiCEx383 Quote 90 Nissan 240sx Avic z-140bh Audison SR4 Audison Voce 6.5s CDT es-20 tweeters Sundown 1500v3 (2) DD 9510's 3 cube box 2 6" aeros XS Power D2400 & Xp950 Skyhigh/Knukonceptz/Rockford Fosgate wiring More Coming Soon.. Check my builds below. 97 Civic Hatch Build 86 Caprice Build you can pick up a chick in a car... I think it'd be hard to roll up mackin on a broad sittin on a sundown. My opinion Link to comment Share on other sites More sharing options...
Relyks Posted January 28, 2012 Author Report Share Posted January 28, 2012 no way going less air space port will just have to be worked with AudioQue like a lot of air and ken at audioque recommended 5.00cu.ft and everybody told me that i should give them more so. help me work with the port needs more or less port? Quote --> My Toyota Build Link / AudioQue Build . <-- Latest Update 1/16/12 Link to comment Share on other sites More sharing options...
pa-pa-platypus Posted January 28, 2012 Report Share Posted January 28, 2012 needs more port... and whats ur plans for bracing? and the common port walls like said before.. and i would think two would displace more than .09 lol Quote This isn't teeball. YOU DO NOT GET A TROPHY JUST BECAUSE YOU SHOW UP. Put the work in and then maybe get the respect when it has been earned 151.6 with single 12 at 41 hz 153.2 with 2 12's at 43 hz power: dd m4 Link to comment Share on other sites More sharing options...
bassrace Posted January 28, 2012 Report Share Posted January 28, 2012 I'd say around 4-4.5 net about 14-17 sq in of port per cube. And those woofers displace more than .09. Quote 145.9@40hz 145.3@34hz big 3 X2 group 34 Deka Group 31 All 0/1 awg jl meta wire Alpine CDA 7894 Orion HCCA D5000 2 AQ HDC312's Crunch gpv1100.2 (for 6.5"s only) AQ pro audio 6.5" - 3 sets AQ supertweeters - 2 sets 2000 Slamry Link to comment Share on other sites More sharing options...
Relyks Posted January 28, 2012 Author Report Share Posted January 28, 2012 its .18 with 2 sorry its a .09 cu.ft difference. its going to be double baffle maybe a tie rod in middle but its not so much power that it need anything special like resin or support. Quote --> My Toyota Build Link / AudioQue Build . <-- Latest Update 1/16/12 Link to comment Share on other sites More sharing options...
Relyks Posted January 28, 2012 Author Report Share Posted January 28, 2012 no 1 AudioQue SD 2.5 woofer has .09 displacement. and 4.cu.ft is to small last time i am going to say AQ Subs like alot of air and perform better on a lot of air. Quote --> My Toyota Build Link / AudioQue Build . <-- Latest Update 1/16/12 Link to comment Share on other sites More sharing options...
CaPRiCEx383 Posted January 28, 2012 Report Share Posted January 28, 2012 (edited) Alright just try working on the port keeping the dimensions the same, Try a wider port until you get within the 12-14 range at least. So try like 4.5, then 5 then 5.5 and so on until you get in the range and then adjust length to what u want. Edited January 28, 2012 by CaPRiCEx383 Quote 90 Nissan 240sx Avic z-140bh Audison SR4 Audison Voce 6.5s CDT es-20 tweeters Sundown 1500v3 (2) DD 9510's 3 cube box 2 6" aeros XS Power D2400 & Xp950 Skyhigh/Knukonceptz/Rockford Fosgate wiring More Coming Soon.. Check my builds below. 97 Civic Hatch Build 86 Caprice Build you can pick up a chick in a car... I think it'd be hard to roll up mackin on a broad sittin on a sundown. My opinion Link to comment Share on other sites More sharing options...
bassrace Posted January 28, 2012 Report Share Posted January 28, 2012 no 1 AudioQue SD 2.5 woofer has .09 displacement. and 4.cu.ft is to small last time i am going to say AQ Subs like alot of air and perform better on a lot of air. Did you have the AQ 1200 last time? Quote 145.9@40hz 145.3@34hz big 3 X2 group 34 Deka Group 31 All 0/1 awg jl meta wire Alpine CDA 7894 Orion HCCA D5000 2 AQ HDC312's Crunch gpv1100.2 (for 6.5"s only) AQ pro audio 6.5" - 3 sets AQ supertweeters - 2 sets 2000 Slamry Link to comment Share on other sites More sharing options...
CaPRiCEx383 Posted January 28, 2012 Report Share Posted January 28, 2012 ok, you need to put .18 in the displacement, 3 common port walls, 1 in the extra baffle, and way more port Quote 90 Nissan 240sx Avic z-140bh Audison SR4 Audison Voce 6.5s CDT es-20 tweeters Sundown 1500v3 (2) DD 9510's 3 cube box 2 6" aeros XS Power D2400 & Xp950 Skyhigh/Knukonceptz/Rockford Fosgate wiring More Coming Soon.. Check my builds below. 97 Civic Hatch Build 86 Caprice Build you can pick up a chick in a car... I think it'd be hard to roll up mackin on a broad sittin on a sundown. My opinion Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.