kickass audio Posted February 4, 2012 Report Share Posted February 4, 2012 My tinsel leads did the same on my SMD. The sub never got hot and only bottomed out 2 times throughout the entire time i used it which was because the damn remote knob on my 3sixty.2 has problems where the volume will out of nowhere go full tilt and back to where i set the knob so im going to remove the knob when i reinstall the system in 2 years. It too burnt 2 leads (1 per coil) and was on its way to burning a 3rd lead but the sub quit out before it got too far into that. I know it was clipping a few times with how the bass would fluctuate with that bass knob so i admit it was user error with that god damn bass knob. Id recone it like im doing to my SMD and set your gains to a -5db or if you want the best a 0db tone and set the freq on the amp correctly. I am still learning other things that may have caused my leads to burn and break like they did but im sure clipping and those few times it bottomed out didnt help any. Quote 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
ben29555 Posted February 4, 2012 Author Report Share Posted February 4, 2012 bump Quote My Build Log loud bass songs Link to comment Share on other sites More sharing options...
cheese20323 Posted February 4, 2012 Report Share Posted February 4, 2012 bump This happened to my RE I just soldered them back together with a little gun and they work good. Quote 92 Accord Build Link to comment Share on other sites More sharing options...
ben29555 Posted February 4, 2012 Author Report Share Posted February 4, 2012 how long have you been using it like that for? Quote My Build Log loud bass songs Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.