pburke2009 Posted February 14, 2012 Report Share Posted February 14, 2012 What do you normally set your phase too? Quote 2008 Dodge Avenger SE Pioneer 4300-UB Headunit DC 1.2K 10"DC Lvl 3 with Lvl 4 coil... 15" DC Lvl 4 JVC Arsenal 3-way Component set Link to comment Share on other sites More sharing options...
Chris Lamp Posted February 14, 2012 Author Report Share Posted February 14, 2012 Looks like I get to break out my trusty SMD Distortion Detector DD-1 again Quote Link to comment Share on other sites More sharing options...
skittlesRgood Posted February 14, 2012 Report Share Posted February 14, 2012 What do you normally set your phase too? 0* Looks like I get to break out my trusty SMD Distortion Detector DD-1 again tune one amp with that, then use a DMM to gain match the second amp. then strap them together. thats how i always did it. except without a dd-1 Quote If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people. Link to comment Share on other sites More sharing options...
Chris Lamp Posted February 14, 2012 Author Report Share Posted February 14, 2012 What do you normally set your phase too? 0* Looks like I get to break out my trusty SMD Distortion Detector DD-1 again tune one amp with that, then use a DMM to gain match the second amp. then strap them together. thats how i always did it. except without a dd-1 Hmm never used a Multimeter, any tutorial suggestions on what to do in this scenario? Quote Link to comment Share on other sites More sharing options...
skittlesRgood Posted February 14, 2012 Report Share Posted February 14, 2012 pretty simple. set gain with dd-1 on one amp. remove dd-1. put DMM on AC voltage where the dd-1 was hooked up to and play the same tone at the same volume. write down the dmm reading. now put the DMM to the second amp and turn the gain until you get exactly the same number as the 1st amp. same volume and tone again. Quote If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people. Link to comment Share on other sites More sharing options...
notorious97200 Posted February 14, 2012 Report Share Posted February 14, 2012 If you have a slave and a master, no need to set the gain on the slave amp, only on the master. That's what I always thought. I did it with 2 Sundown saz 1000 and it works great for 2 years. Quote black BMW X1 2.0 l 192 hp OEM head unit, Amplifiers : Audison AP 8.9 amp with integrated DSP and Ampere Audio 1200. Focal ES 100 K in front doors, and Dayton RS 180 for midbass under the front seats. 2 SSA DEMONS 10" subs, in a 2.6 ft3 ported box. SecondSkin Damplifier on front doors, and Luxury Liner Pro for the cargo area. Link to comment Share on other sites More sharing options...
Hunters21w Posted February 15, 2012 Report Share Posted February 15, 2012 Yea the whole point of strapping is it gain matches them. No need for dmm to match output. Quote 06 Police TahoeHU- Pioneer 80prsAmp- Crossfire 8kSub- 4 15" Crossfire xs v2sWire- 1/0 Knu/AudiotechnixAlt- 3 Mechman SMD 340sBatts- 6 XS Power 3100s, 2400 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.