Joe X Posted March 16, 2012 Report Share Posted March 16, 2012 The way id like to do it is just like the pic I posted earlier except the port would be not as wide and box would be shrunk 2in from top to bottom that way it could be positioned with port on bottom or top. Or it could be all facing up with port by the back glass Link to comment Share on other sites More sharing options...
carshateme Posted March 16, 2012 Report Share Posted March 16, 2012 The way id like to do it is just like the pic I posted earlier except the port would be not as wide and box would be shrunk 2in from top to bottom that way it could be positioned with port on bottom or top. Or it could be all facing up with port by the back glass Sorry about the delay, fell asleep, I'm going to start working on it right now. I can use your design but you'll have 1 common wall...and a lot of dead space. This is what I'm running into. Joe X, Shut the fuck up please. You haven't a clue what you're talking about half the time, you're just plugging in numbers and pasting. New build coming soon. [center][url="http://imageshack.us/photo/my-images/3/sigtoo.jpg/"][img]http://img3.imageshack.us/img3/9541/sigtoo.jpg[/img][/url][/center] Link to comment Share on other sites More sharing options...
carshateme Posted March 16, 2012 Report Share Posted March 16, 2012 Editted: Wrong picture. New build coming soon. [center][url="http://imageshack.us/photo/my-images/3/sigtoo.jpg/"][img]http://img3.imageshack.us/img3/9541/sigtoo.jpg[/img][/url][/center] Link to comment Share on other sites More sharing options...
412 CVX Posted March 16, 2012 Report Share Posted March 16, 2012 sometimes 2 inches or less clearance is all you need. the port width clearance thing is just a rule of thumb.. it has plenty of exceptions. in fact some people have gained from having the port so close to the back Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid. Link to comment Share on other sites More sharing options...
jeffrm Posted March 17, 2012 Author Report Share Posted March 17, 2012 ok i got this now 03 tahoe z71 4 death penalty 18s 2 ampere audio 3800s @ .5 each 18v 156.7 @ 35hz 158.5 @ 50hz Link to comment Share on other sites More sharing options...
carshateme Posted March 17, 2012 Report Share Posted March 17, 2012 Lots of dead air there. Just saying. New build coming soon. [center][url="http://imageshack.us/photo/my-images/3/sigtoo.jpg/"][img]http://img3.imageshack.us/img3/9541/sigtoo.jpg[/img][/url][/center] Link to comment Share on other sites More sharing options...
jeffrm Posted March 17, 2012 Author Report Share Posted March 17, 2012 You talking about on the sides of the port 03 tahoe z71 4 death penalty 18s 2 ampere audio 3800s @ .5 each 18v 156.7 @ 35hz 158.5 @ 50hz Link to comment Share on other sites More sharing options...
VIPmeetSPL Posted March 17, 2012 Report Share Posted March 17, 2012 You talking about on the sides of the port ding ding ding!! Link to comment Share on other sites More sharing options...
jeffrm Posted March 17, 2012 Author Report Share Posted March 17, 2012 Ok what if I made it so there werent no voids on the sides but the outer dims stayed the same and adjusted the length 03 tahoe z71 4 death penalty 18s 2 ampere audio 3800s @ .5 each 18v 156.7 @ 35hz 158.5 @ 50hz Link to comment Share on other sites More sharing options...
Joe X Posted March 17, 2012 Report Share Posted March 17, 2012 ok i got this now I would add at least some front to back crossbracing between the subs. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.