pa-pa-platypus Posted March 26, 2012 Report Posted March 26, 2012 i really dont like you using liquid nails... ive had problems with it in the past coming apart on me...wood glue works fine..but what i use is ---> http://www.lowes.com/pd_44917-65911-F26-34_4294729391_4294937087_?productId=1087179&Ns=p_product_rating%7C1&pl=1¤tURL=%2Fpl_Glues%2BTapes_4294729391_4294937087_%3FNs%3Dp_product_rating%7C1&facetInfo= AMI customs turned me onto it.. alot easier to apply and every bit as strong as wood glue Quote This isn't teeball. YOU DO NOT GET A TROPHY JUST BECAUSE YOU SHOW UP. Put the work in and then maybe get the respect when it has been earned 151.6 with single 12 at 41 hz 153.2 with 2 12's at 43 hz power: dd m4
C-Fizzy Posted March 26, 2012 Report Posted March 26, 2012 Ehhhh theyre only 18g tho. Quote under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy?
ant the ninja Posted March 26, 2012 Author Report Posted March 26, 2012 Thats pretty cheap for that big tube. Maybe Ill pick some of that up, Why is it easier to apply? Quote 2002 Ford Explorer XLT Front Stage: Crescendo CCX 6.5's Rear Stage: ??? Two 15" Powerbass M154 Audiopipe AP15001d Pioneer DEH-P5100UB
ant the ninja Posted March 26, 2012 Author Report Posted March 26, 2012 (edited) Ehhhh theyre only 18g tho. I never noticed that...well now what? haha You dont think I can squeese some knu 12ga in there? It says it accepts up to 8g though.. Edited March 26, 2012 by ant the ninja Quote 2002 Ford Explorer XLT Front Stage: Crescendo CCX 6.5's Rear Stage: ??? Two 15" Powerbass M154 Audiopipe AP15001d Pioneer DEH-P5100UB
IH8PunkRok Posted March 26, 2012 Report Posted March 26, 2012 they fit 8 gauge but only one trust me Quote -Matt2005 Dodge Magnum RTJVC KD-AVX1 2 PPI S580.2 Obsidian Audio ST1 Horn Tweeters PRV 8MB450s Audio Legion 3500.1D 2 RE MT 18s 360 ah LiFePO4 BatterySHCA 2/0 155.2 @ 29 hzKicker CVR 15's buildDD 3512e buildMini T-Line Build(6) 8s BuildNightshade 15s Wall BuildMagnum AB XFL 12s BuildNewest Magnum Build
ant the ninja Posted March 26, 2012 Author Report Posted March 26, 2012 they fit 8 gauge but only one trust me I was just about to buy a run of 8gauge too...Ill be rethinking that haha. Thanks Quote 2002 Ford Explorer XLT Front Stage: Crescendo CCX 6.5's Rear Stage: ??? Two 15" Powerbass M154 Audiopipe AP15001d Pioneer DEH-P5100UB
IH8PunkRok Posted March 26, 2012 Report Posted March 26, 2012 each one of those posts has cadence 8 gauge in it but it was rough to make them fit Quote -Matt2005 Dodge Magnum RTJVC KD-AVX1 2 PPI S580.2 Obsidian Audio ST1 Horn Tweeters PRV 8MB450s Audio Legion 3500.1D 2 RE MT 18s 360 ah LiFePO4 BatterySHCA 2/0 155.2 @ 29 hzKicker CVR 15's buildDD 3512e buildMini T-Line Build(6) 8s BuildNightshade 15s Wall BuildMagnum AB XFL 12s BuildNewest Magnum Build
Ballen194 Posted March 26, 2012 Report Posted March 26, 2012 Anyone ever used self tapping screws? Pass up the pre drill and just use these? Quote 98 Isuzu Rodeo Pioneer Deh-6300ub SUBS*Upcoming* SSA Xcon 18 4th order AMP Banda 3500 Mids/Highs Pioneer EQ Clarion EQS746 ETC. Two 1/0 run's KnuKoncepts 1/0 big 3 Shuriken BT-100 under the hood Shuriken BT-120 in the back
pa-pa-platypus Posted March 26, 2012 Report Posted March 26, 2012 Anyone ever used self tapping screws? Pass up the pre drill and just use these? the predrilling is to stop the screws from splitting the wood and sink into it better...self tappers would split the hell out of mdf i would think..but no ive never tried it Quote This isn't teeball. YOU DO NOT GET A TROPHY JUST BECAUSE YOU SHOW UP. Put the work in and then maybe get the respect when it has been earned 151.6 with single 12 at 41 hz 153.2 with 2 12's at 43 hz power: dd m4
ant the ninja Posted March 26, 2012 Author Report Posted March 26, 2012 each one of those posts has cadence 8 gauge in it but it was rough to make them fit Im barely running 1kw so I think the 12g should be fine for my application. Anyone ever used self tapping screws? Pass up the pre drill and just use these? the predrilling is to stop the screws from splitting the wood and sink into it better...self tappers would split the hell out of mdf i would think..but no ive never tried it Those I was told to stay away from at all costs Quote 2002 Ford Explorer XLT Front Stage: Crescendo CCX 6.5's Rear Stage: ??? Two 15" Powerbass M154 Audiopipe AP15001d Pioneer DEH-P5100UB
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.