Jump to content
Sonic Electronix

Recommended Posts

Posted

so here is a quick question i would like to ask....

if i do a system build with 4 350wRMS subwoofers, and they would be powered by a 1800wRMS amp is there something wrong with it??

i mean...

i opened a topic in some other site and they keep complaining about that like hell....

2010 Chevrolet Cruze

Radio --- pioneer mvh-200vbt

Front/back --- alpine type s 6.5"

Sub Control --- Pac LC1

Sub Amp --- GZPA 1.4K

Sub --- GZNW 15XSPL D1

Battery - GZBP 12.2500X

Posted

It really depends on said subwoofers.

If they are a good, reputable brand and you are feeding them clean power in a properly designed enclosure: you should be fine

Posted

like mentioned above..if they are getting good clean power you should be fine

I have personally ran more than 3x RMS to subs with no problem what so ever out of that setup...not saying you can do that with any woofer though

http://www.stevemead...cherokee-build/

2005 Jeep Grand Cherokee

Alpine CDE-hd148bt

Alpine PKG-RSE2

PRV Audio (4) 6MB200 front/rear doors

PRV Audio (4) TW350Ti dash/rear doors

Kicker KX350.4

Obsidian Audio (1) 18 D4 v2

revamp (2) Stereo Integrity HT 18d2
DC Audio 1.2k
5.25ft^3 tuned @34hz

revamp Infinite Baffle Cpillar

AudioTechnix 60mil deadener
KnuKonceptz & SkyHigh wire (complete setup)

stroupe79.jpg

Posted

i would feed 4 re audio SR with a DD m1b......if that wouldnt go trough just 2 15 re audio SE...

2010 Chevrolet Cruze

Radio --- pioneer mvh-200vbt

Front/back --- alpine type s 6.5"

Sub Control --- Pac LC1

Sub Amp --- GZPA 1.4K

Sub --- GZNW 15XSPL D1

Battery - GZBP 12.2500X

Posted

i would feed 4 re audio SR with a DD m1b......if that wouldnt go trough just 2 15 re audio SE...

I ripped the surrounds off of my RE SRx's on double their RMS rating. The coils were pretty and took the abuse, but the soft parts did not. I fed them clean 600 watts a piece and they lasted a couple years before the surrounds shredded.

Im not the one you want to try to troll. Just a fyi for you.

Posted

so that leaves me with just 2 re audio SE 15˝ in a proper box....

2010 Chevrolet Cruze

Radio --- pioneer mvh-200vbt

Front/back --- alpine type s 6.5"

Sub Control --- Pac LC1

Sub Amp --- GZPA 1.4K

Sub --- GZNW 15XSPL D1

Battery - GZBP 12.2500X

Posted (edited)

i would feed 4 re audio SR with a DD m1b......if that wouldnt go trough just 2 15 re audio SE...

I ripped the surrounds off of my RE SRx's on double their RMS rating. The coils were pretty and took the abuse, but the soft parts did not. I fed them clean 600 watts a piece and they lasted a couple years before the surrounds shredded.

i mean....i placed a question the same as here 4 re audio SR with M1b? on some other forum

and they keep complaining to give them NOT the rated power but at least 3x the power....i mean....am i missing something??

all of that would be in a sealed box of course...

Edited by gally

2010 Chevrolet Cruze

Radio --- pioneer mvh-200vbt

Front/back --- alpine type s 6.5"

Sub Control --- Pac LC1

Sub Amp --- GZPA 1.4K

Sub --- GZNW 15XSPL D1

Battery - GZBP 12.2500X

Posted

bumps

2010 Chevrolet Cruze

Radio --- pioneer mvh-200vbt

Front/back --- alpine type s 6.5"

Sub Control --- Pac LC1

Sub Amp --- GZPA 1.4K

Sub --- GZNW 15XSPL D1

Battery - GZBP 12.2500X

Posted

1400w worth of woofer with an 1800w amp. should be fine in my eyes. if you want to get technical, voltage drop and impedance rise would make you lose a few hundred watts anyway (depending on the box, of course)

Posted

1400w worth of woofer with an 1800w amp. should be fine in my eyes. if you want to get technical, voltage drop and impedance rise would make you lose a few hundred watts anyway (depending on the box, of course)

well the DD M1b would be just for subwoofer break in period, later i would switch to DD m4....

2010 Chevrolet Cruze

Radio --- pioneer mvh-200vbt

Front/back --- alpine type s 6.5"

Sub Control --- Pac LC1

Sub Amp --- GZPA 1.4K

Sub --- GZNW 15XSPL D1

Battery - GZBP 12.2500X

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 764 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...