PUNKYOU007 Posted April 4, 2012 Report Posted April 4, 2012 I need to find a good source for acrylic. I am building an bandpass box and need to price it up. Is acrylic even what I should use? Doethepaperboy "Bars of Pain" Doethepaperboy "Hero Remix" C. Arson d(-__-)b beer sucks...but i can bring some jose cuervo. Only problem is that it makes me horny and gives me the rams. So unless yall wanna fight and then have some great make up sex i will leave it home.
Azagtoth502 Posted April 4, 2012 Report Posted April 4, 2012 It needs to be THICK, which isn't cheap. pa-pa-platypus sorry not everybody has a companies nuts so far down their throat they catch every drop ball sweat when it falls
PUNKYOU007 Posted April 4, 2012 Author Report Posted April 4, 2012 You think 3/4" would be thick enough? Its not a huge build. Just two HDC3 15s. I was thinking 3/4" sandwiched between two layers of 3/4" wood. Doethepaperboy "Bars of Pain" Doethepaperboy "Hero Remix" C. Arson d(-__-)b beer sucks...but i can bring some jose cuervo. Only problem is that it makes me horny and gives me the rams. So unless yall wanna fight and then have some great make up sex i will leave it home.
Hotdog Posted April 4, 2012 Report Posted April 4, 2012 for the baffle only? Is this for lighting effect? You think 3/4" would be thick enough? Its not a huge build. Just two HDC3 15s. I was thinking 3/4" sandwiched between two layers of 3/4" wood. (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764
PUNKYOU007 Posted April 4, 2012 Author Report Posted April 4, 2012 Its a bandpass box so I either build it to where he cannot see his subs...or I put a window in the sealed side of the box so you can see in. Doethepaperboy "Bars of Pain" Doethepaperboy "Hero Remix" C. Arson d(-__-)b beer sucks...but i can bring some jose cuervo. Only problem is that it makes me horny and gives me the rams. So unless yall wanna fight and then have some great make up sex i will leave it home.
Ray Posted April 4, 2012 Report Posted April 4, 2012 3/4" is fine. Extruded is cheaper than cast. 2008 California state record holder 157.2 Bassrace2009 California state record holder 157.0 BassraceRollin 50's 158.7db2009 King of Cali Bassrace2009 USACi score 160.5 @ 42hz
bumonskateboard6 Posted April 4, 2012 Report Posted April 4, 2012 I've ordered here a few times and always been happy http://www.estreetplastics.com/Plexiglass_Sheets_Clear_s/21.htm Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also?
PUNKYOU007 Posted April 4, 2012 Author Report Posted April 4, 2012 3/4" is fine. Extruded is cheaper than cast. Any place online that has it? I've ordered here a few times and always been happy http://www.estreetpl..._Clear_s/21.htm I just found there site a min ago...seems like they have pretty good prices. Doethepaperboy "Bars of Pain" Doethepaperboy "Hero Remix" C. Arson d(-__-)b beer sucks...but i can bring some jose cuervo. Only problem is that it makes me horny and gives me the rams. So unless yall wanna fight and then have some great make up sex i will leave it home.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.