Jump to content
Sundown Audio

Amp popping into protect.


evermaxx

Recommended Posts

Friends amp pops into protect, sony xplode 700watt with 1 12" Audiobaun SE

Funny thing is, he can play it with car on ACC and it bangs, but as soon as we go for a drive turn it up over 31/40 i goes into protect.

with car off, he can go fully. Thoughts? Yes I know check grounds and everything, and I know its bad to play with car off, it was just to test it for ~45 seconds.

33y2914.jpg

Team Subsonic Lows


Get your garbage EMF products of my amp bitch


Man....it makes a nice work bench ;)

Link to comment
Share on other sites

Maybe to much power going to it too quick:/ try setting the gain down see what happens see if you can turn it up louder

that wouldn't make sense. the amp will pull as much power as it needs. the alt cant give it like 150a of power when it only draws 60, for example.

Edited by Kranny
Link to comment
Share on other sites

Are you clipping?

What's the ohm load on the amp?

What sort of voltage are you getting at the amp when it goes into protect?

Link to comment
Share on other sites

Are you clipping?

What's the ohm load on the amp?

What sort of voltage are you getting at the amp when it goes into protect?

this.

also check your grounds, and check them again.. what size wire is the power and ground wire? where are you grounded, where is the amps location in the vehicle.

how hot is it in the car?

is there any airflow to the amp when your driving?

09 Civic EX

KDC-X395

(2) SKAR Audio VVX-12

Skar Audio SK-1500.1

4 cu ft @32 (new box and more port soon)

Firing Forward not sealed off

Stock 80 Amp Alt

Big 3 In 1/0 Knu

2 Runs To The Back 1 Pos 1 Neg In 1/0 Knu

DD-1'd 13.8v drop

Link to comment
Share on other sites

Are you clipping?

Amp was set by ear, he doesn't have tools to do it, but its not set crazy I know.

What's the ohm load on the amp?

Not sure, 1ohm I believe?

What sort of voltage are you getting at the amp when it goes into protect?

On dash it's still steady. Before this set up he had a 1500 audiopipe and you could see the volt gague on dash move, so if the voltage was going down we could see it.

Are you clipping?

What's the ohm load on the amp?

What sort of voltage are you getting at the amp when it goes into protect?

this.

also check your grounds, and check them again.. what size wire is the power and ground wire? where are you grounded, where is the amps location in the vehicle.

how hot is it in the car?

Not sure, we've tried windows down, and A/C

is there any airflow to the amp when your driving?

Its behind the seat in an SUV.. amp is hot to touch after some time.

33y2914.jpg

Team Subsonic Lows


Get your garbage EMF products of my amp bitch


Man....it makes a nice work bench ;)

Link to comment
Share on other sites

My guess would be voltage too low with the car on which is why it's going into protect.

possibly bad alt?

^^^Check the alt first...what kind of batts are you running?

2013 Dodge Charger

Build Log


1996 Ford Explorer XLT 5.0
Build Log

2005 Honda Civic LX Coupe

Build Log

SMD SUPER SELLER!!!!
My Selling Feedback

Dresig1_zps7acbddbb.gif

Dresig2_zpscfb11527.gif

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...