Amart88 Posted April 11, 2012 Report Share Posted April 11, 2012 I got a bottle of Isopropyl rubbing alcohol here (for cuts and wounds) and was wondering if that can be used to clean the surface before applying the deadner? Quote My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
uhoh_45 Posted April 11, 2012 Report Share Posted April 11, 2012 its what i used to clean before i layed shit down- it evaporates fast too which is nice and it is relatively cheap Quote R.I.P! (Nov-29-2009) 92 explorer - 4 Atomic Apxx 15s duel .7s - 4rth order bandpass wall -4 powerbass XA-3000D's - 16 8volt batts wired to 16 volts - (9+/9-) runs 0gauge - 152.3 Db @ 29hz BUILD LOG current build 97 chevy lumina4 - 1 Atomic Apx 18 - 6 cube slot port trunk sealed off - 1 powerbass XA-3000D - 2 optima G31s in spare tire18 1 run 1/0 lumina build log Link to comment Share on other sites More sharing options...
toadking90 Posted April 11, 2012 Report Share Posted April 11, 2012 Yeah. It sticks so well you can almost just clean it with a dry rag. Lol. But I use rubbing alcohol as well. Works fine for me. Quote Link to comment Share on other sites More sharing options...
Amart88 Posted April 11, 2012 Author Report Share Posted April 11, 2012 Ok thanks Quote My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
getlocivic Posted April 11, 2012 Report Share Posted April 11, 2012 scrape off all excess stuff with a razor blade and then wipe down with alcohol also if you use a heatgun no matter the brand of deadener it always goes on easier/comforms better and sticks better too Quote Link to comment Share on other sites More sharing options...
Second Skin Rep Jon Posted April 11, 2012 Report Share Posted April 11, 2012 Yep yep, that will work just fine. The main thing is to avoid using any citrus based cleaners as they tend to leave an oily residue. And it's best to install the product at or around room temp. Quote Have a question about Second Skin? E-Mail me! Link to comment Share on other sites More sharing options...
Amart88 Posted April 11, 2012 Author Report Share Posted April 11, 2012 Any techique to using heat gun? Quote My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
Jaloosk Posted April 11, 2012 Report Share Posted April 11, 2012 Turn on gun Heat product Turn off gun (safety first) Stick product to car Repeat Quote "Cheap, good or fast. You can only pick two out of three." "Have money? Love story! No money? I'm sorry." Link to comment Share on other sites More sharing options...
Amart88 Posted April 11, 2012 Author Report Share Posted April 11, 2012 Turn on gun Heat product Turn off gun (safety first) Stick product to car Repeat LOL just wasnt sure if you heated the product or th surface. Thanks for clearing that up. Quote My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
Jaloosk Posted April 11, 2012 Report Share Posted April 11, 2012 That's the procedure I used; worked great and it was about 50ºF outside. I was in the garage though. Haven't had any issues in the couple of weeks its been on... Quote "Cheap, good or fast. You can only pick two out of three." "Have money? Love story! No money? I'm sorry." Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.