Help with ported box design?

[Joshex]

I am currently designing a box for my Kicker L7s S8L72 with 2 Kicker ZX300.1 mono amps.

Here is what I've come up with:

W: 32"

D: 20"

H: 17

5.06 Cubic feet

I will be using 3/4" MDF for this.

I was wondering if I could do a 6" port tuned to 35 hertz. Would that make it roughly around 7.9"?

Any help and suggestion would be greatly appreciated!

New Design Here -> http://www.stevemeadedesigns.com/board/topic/141317-95-ford-escort-custom-build/page__fromsearch__1 <-

[Joe X]

Ok so better explain a bit. are you looking to design a box for a single L7 8" box?

[john253a]

that sub wont last 5mins at that power in 5cuft

[john253a]

kicker specs v's power handling (remember all kicker specs are gross not net with 50%polly fill, dont ask my why they just do it that way)

sealed compact 0.5cuft 200rms

sealed SQ 0.75cuft 200rms

vented compact 0.66cuft 375rms

vented SQ 1cuft 375rms

[john253a]

http://www.kicker.com/sites/default/files/2011%20L7%20Multilingual%20Rev%20B.pdf

[Joshex]

Sorry for not getting back to you all. I had my model number wrong they were 12" L7s.

But I had to totally redesign my set up. I'll be posting pics on the rides and builds section of the forums.