Tseng2394 Posted May 6, 2012 Report Share Posted May 6, 2012 I was driving today with the volume up and everything was all good until suddenly the speakers would go off when the bass would hit. This only happens at high volumes. Im running a p400-4 and p1000 Quote AlphaDamp CLD Mat - Get more Sound Deadening with less Sound Deadener Link to comment Share on other sites More sharing options...
Kranny Posted May 6, 2012 Report Share Posted May 6, 2012 my guess is voltage drop. do you have the big 3 done? are your grounds bolted to the frame/strut tower with the paint sanded off? Quote Link to comment Share on other sites More sharing options...
Kyblack76 Posted May 6, 2012 Report Share Posted May 6, 2012 my guess is voltage drop. do you have the big 3 done? are your grounds bolted to the frame/strut tower with the paint sanded off? X2 with Kranny (as usual) do BOTH amps, and drivers on those amps stop? or just one, and not the other? Like K said, if your losing BOTH, then voltage/ground and anything with both has to be the issue......Meter time.... Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Tseng2394 Posted May 6, 2012 Author Report Share Posted May 6, 2012 Losing just one... Had the voltage checked yesterday and it checked out Quote AlphaDamp CLD Mat - Get more Sound Deadening with less Sound Deadener Link to comment Share on other sites More sharing options...
Skullz Posted May 6, 2012 Report Share Posted May 6, 2012 Bad connection on either ground or power so when it hits hard it breaks the connection and shuts the amp down. Check every connection on power and ground and see which one is not tightened making a good solid connection. Quote 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2 Link to comment Share on other sites More sharing options...
Tseng2394 Posted May 6, 2012 Author Report Share Posted May 6, 2012 The amps are running off a distribution block. Every connection seems to be fine. Could the battery be the problem? Quote AlphaDamp CLD Mat - Get more Sound Deadening with less Sound Deadener Link to comment Share on other sites More sharing options...
t-money Posted May 6, 2012 Report Share Posted May 6, 2012 Losing just one... Had the voltage checked yesterday and it checked out im guessing this means u went to an auto parts store and had them check your voltage? that will not tell you if you have volage drop. you need to put a meter on the amps and monitor the voltage when it shuts off Quote 2002 ford focus hatch pioneer DEH-P8400bh infinity kappa 6.5 components front and rear XS Power D1200 Shuriken BT-100 audioque 120.4 2 15 inch audioque HDC3 D2 2 audioque 2200d big 3 mechman 220a alt with external regulator 479-418-3056 Link to comment Share on other sites More sharing options...
darkjds Posted May 6, 2012 Report Share Posted May 6, 2012 only had that happen when my second battery's power wire came undone Quote Current Setup: , 2 Fi sp4 18s in a big ass flat wall tuned to 23hz, Pioneer 80prs, 2 Digital Designs m3bs strapped @ 2 ohms, Banda ICE2000, Crescendo 800.4, 4 PRV 10MR1000s,4 Mclaren MLT300 Super Tweeters Kinetik 2000 XS Power 2700 & XS Power 3100s. Link to comment Share on other sites More sharing options...
Kyblack76 Posted May 6, 2012 Report Share Posted May 6, 2012 ok, just one,... which one? your sub amp? Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Tseng2394 Posted May 7, 2012 Author Report Share Posted May 7, 2012 I went to the shop in which i got the install done amd they replaced an old circuit breaker with a fuse holder. They checked the voltage at every point needed. All checked out Quote AlphaDamp CLD Mat - Get more Sound Deadening with less Sound Deadener Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.